会员中心 | English | 繁體中文

英制，螺柱用压紧弹簧止动圈 SAE J 892 (F5) - 1996

选择规格尺寸点击↓

10#

1/4

5/16

3/8

7/16

1/2

尺寸单位: inch

美标SAE J892 (F5) - 1996 SAE892 892SAE 英制，螺柱用压紧弹簧止动圈

扫一扫分享

公差美制螺纹极限尺寸米/英制螺纹对照

规格

10#

1/4

5/16

3/8

7/16

1/2

类型
D	偏差值 ±0.01
H	偏差值 ±0.015
E	偏差值 ±0.0015
G	最小螺栓或螺钉突出量
F	①
F	②

Style 3	Style 3	Style 3	Style 1	Style 1	Style 1	Style 2	Style 2	Style 2	Style 2	Style 2	Style 2
0.344	0.375	0.437	0.500	0.500	0.625	0.781	-	0.843	-	0.938	-
0.047	0.049	0.065	0.078	0.078	0.082	0.093	-	0.103	-	0.122	-
0.010	0.010	0.012	0.010	0.010	0.015	0.015	-	0.015	-	0.015	-
0.140	0.140	0.156	0.188	0.188	0.218	0.218	-	0.250	-	0.250	-
3.8	4.9	5.6	5.6	5.6	6.7	6.7	6.7	6.7	6.7	6.7	6.7
9.0	11.2	14.6	20.2	20.2	22.5	33.7	33.7	56.2	67.2	67.2	67.2

①,Performance Maximum Push-On Force（lb）.
②,Performance Minimum Removal Force（lb）.

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3103.3 - 2020

紧固件公差平垫圈

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 305 - 2019	滚动轴承用止动环 - 尺寸系列18、尺寸系列19 Rolling Bearings-Snap Ring 供应商(3)
2	[国标] GB /T 305 - 1998	滚动轴承用止动环 - 尺寸系列18、尺寸系列19 Rolling Bearings-Snap Ring 供应商(3)
3	[国标] GB 854 - 1988	单耳止动垫圈 Tab Washers With Long Tab 供应商(6)
4	[国标] GB 855 - 1988	双耳止动垫圈 Tab Washers With Long Tab And Wing 供应商(5)
5	[国标] GB 856 - 1988	外舌止动垫圈 External Tab Washers 供应商(3)
6	[国标] GB 858 - 1988	圆螺母用止动垫圈 Tab Washers For Round Nuts 供应商(7)
7	[国标] GB /T 305 - 2019	滚动轴承用止动环 - 直径系列0、2、3、4 Rolling Bearings-Snap Ring
8	[国标] GB /T 9160.2 (MB/MBA) - 2017	滚动轴承附件 - 锁紧垫圈 MB/MBA型 Rolling bearings - Lockwashers - Type MB/MBA
9	[国标] GB /T 9160.2 (MBL) - 2017	滚动轴承附件 - 锁紧垫圈 MBL系列 Rolling bearings - Lockwashers - MBL Series
10	[国标] GB /T 9160.2 (MB) - 2006	滚动轴承附件 - 锁紧垫圈 MB、MBA型 Rolling bearings - Lockwashers - Type MB、MBA
11	[国标] GB /T 9160.2 (MBL) - 2006	滚动轴承附件 - 锁紧垫圈 MBL系列 Rolling bearings - Lockwashers - MBL Series
12	[国标] GB 1021 - 1978	角形垂直单耳止动垫圈 Lock Washers With Angular Upturn Tab Perpendicular To The Lug
13	[国标] GB 1024 - 1978	角形外舌止动垫圈 Lock washers with angular upturn tab in line to the external tab
14	[国标] GB 1022 - 1976	角形单耳止动垫圈 Lock Washers With Angular Upturn Tab In Line To The Lug
15	[国标] GB 1023 - 1976	角形垂直外舌止动垫圈 Lock washers with angular upturn tab perpendicular to the external tab
16	[德标] DIN 5406 - 2011	滚动轴承 - 锁紧垫圈 Rolling bearings - Lockwashers; Safety plate, Lockclip 供应商(2)
17	[德标] DIN 5406 - 1993	圆螺母用止动垫圈 Lockwashers and locking plates for use with rolling bearings 供应商(2)
18	[德标] DIN 432 - 1983	外舌止动垫圈 External Tab Washers (Locking Tab Washers) 供应商(1)
19	[德标] DIN 463 - 1974	双耳止动垫圈 Tab Washers with Long and Short Tap at Right Angles 供应商(1)
20	[德标] DIN 93 - 1974	单耳止动垫圈 Tab washers with long tab 供应商(1)
21	[德标] DIN 6372 - 2002	夹具C型垫圈 C-washer for jigs and fixtures
22	[德标] DIN 6371 - 1999	固定式C形垫圈 Captive C-washer
23	[德标] DIN 70952 - 1976	圆螺母用止退垫圈 A型和B型 Tab Washers For Slotted Round Nuts (Form A & Form B)
24	[德标] DIN 462 - 1973	内舌止动垫圈 Machine Tools; Internal Tab Washers For Slotted Round Nuts In Conformity With DIN 1804
25	[德标] DIN 70951 - 1968	开槽螺母(DIN 70851)用止动环 Snap rings for slotted nuts to DIN 70851
26	[国际] ISO 464 (18/19) - 2015	滚动轴承用止动环 Rolling Bearings - Radial Bearings With Locating Snap Ring, Series 18 and 19
27	[国际] ISO 464 (0/2/3/4) - 2015	滚动轴承用止动环系列 0,2,3,4 Rolling Bearings - Radial Bearings With Locating Snap Ring, Series 0,2,3 and 4
28	[国际] ISO 2982-2 (WS) - 2013	滚动轴承附件 - 直内爪型锁紧垫圈 Rolling bearings - Accessories - Lockwasher with Straight Inner Tab
29	[国际] ISO 2982-2 (WB) - 2013	滚动轴承附件 - 弯内爪型锁紧垫圈 Rolling bearings - Accessories - Lockwasher with Bent Inner Tab
30	[国际] ISO 464 (18/19) - 1995	滚动轴承用止动环尺寸系列：18，19 Rolling Bearings - Radial Bearings With Locating Snap Ring - Dimension series 18 and 19
31	[日标] JIS B 1554 (AW/AWL) - 2016	直内爪型锁紧垫圈 Lockwasher with straight inner tab
32	[日标] JIS B 1554 (AW) - 2016	弯内爪型锁紧垫圈 Lockwasher with bent inner tab
33	[日标] JIS B 1554 (AWL) - 2016	弯内爪型锁紧垫圈 Lockwasher with bent inner tab
34	[汽标代号] Q 408	圆螺母用止动垫圈 Tab washers for round nuts 供应商(2)
35	[机械行业] JB /ZQ 4755 - 2006	矩形止动垫圈 Rectangular washers 供应商(2)
36	[机械行业] JB /ZQ 4347 - 2006	轴端止动垫片
37	[机械行业] JB /ZQ 4762 - 2006	圆螺母用止动垫圈 Tab Washers For Round Nut
38	[机械行业] JB /T 7919.3 - 1999	锁紧垫圈 Lockwasher
39	[意大利] UNI 6599	外舌止动垫圈 External tab washers
40	[意大利] UNI 6600	单耳止动垫圈 Tab Washers With Long Tab
41	[法国] NF E 22-112 - 1969	圆螺母用止动垫圈 Lockwashers For Locknuts - Heavy Series
42	[台湾] CNS 158 - 1994	长方形止动垫圈 Rectangular Lock Washers 供应商(2)
43	[台湾] CNS 159 - 1994	单耳止动垫圈 Tab Washers With Long Tab 供应商(1)
44	[台湾] CNS 4645 - 1983	双耳止动垫圈 Tab Washers With Long And Stort Tab At Right Angles 供应商(1)
45	[台湾] CNS 160 - 1994	外舌止动垫圈 External Tab Washers
46	[台湾] CNS 9569 - 1982	圆螺母用止动垫圈 Tab Washers For Round Nuts
47	[台湾] CNS 4254 - 1978	内舌止动垫圈 Internal Tab Washers
48	[俄标] GOST 13463 - 1977	角形垂直单耳止动垫圈 Tab Lock Washers
49	[美标] ANSI /ABMA 8.2 - 1999	英制滚珠轴承和滚柱轴承配件 — 锁紧垫圈 Table 5.1 Lockwasher Dimensions Inch Design Series W-00 and W-000
50	[美标] ANSI /ABMA 8.2 - 1999	英制滚珠轴承和滚柱轴承配件 — 锁紧垫圈 Table 5.2 Lockwasher Dimensions Inch Design Series TW and WH
51	[航空] HB 6246~6351 - 2002	角形外舌止动垫圈 Angle External Tab Washer