十字槽沉头螺钉（通用头型）- 4.8级，钢制，产品等级A级 DIN EN ISO 7046-1 - 2011
千件重及价格计算
千件重 :
kg x
元/kg =
元/千件
默认密度
g/cm3
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,材料： a)钢，强度等级(材料)：4.8. 标准ISO 898-1 |
采用标准
相关材料标准或牌号
技术条件和引用标准
| 材料 |
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
注：技术数据仅供参考，请以官方原件为准！
告诉我在“易紧通”看到，将给您优惠
联系人：黄俊辉
1540428407
移动电话：
13828802165
电话：0752-3951888, 3951820, 3951821, 3951825, 3951826
Email:
登陆后可见
1540428407
移动电话：
13828802165
电话：0752-3951888, 3951820, 3951821, 3951825, 3951826
Email:
登陆后可见
材质：1008钢、1018#碳钢、Q235碳钢、35#合金钢、304HC不锈钢、316HC不锈钢，表面处理：环保彩锌、环保蓝白锌、环保黑锌、环保镍、热镀锌、达克罗、以及非环保电镀，规格：齐全
[询价]
联系人：杨钦
移动电话：
15162465399
电话：0512-65808790
Email:
登陆后可见
登陆后可见
材料：碳钢、不锈钢，表面处理：本色; 公称直径：M1.2-M8,公称长度：3mm-80mm
[询价]
联系人：马华珍/徐天阳
移动电话：
13095941973, 18268663653
电话：0574-62761228
Email:
登陆后可见
登陆后可见
材料：不锈钢A2-70，A2-80，A4-70，A4-80，A2（302,303,304），A4(316)，410，430 公称范围：规格齐全
[询价]
联系人：汤继勇
移动电话：
15298892886/15262400870
电话：0516-86839568
Email:
登陆后可见
登陆后可见
材质：不锈钢、碳钢；公称直径范围：M1-M14；公称长度范围：5-400mm
[询价]
告诉我在“易紧通”看到，将给您优惠
类似标准及供货信息
| 1 |
|
[国标] GB /T 819.1 - 2016 |
十字槽沉头螺钉 第1部分：4.8级 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供应商(13) |
| 2 |
|
[国标] GB /T 819.2 - 2016 |
十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉 Countersunk Flat Head Screws with Cross Recess - Part 2: Property Class 8.8, Stainless Steel Screws and Non-ferrous Metal Screws 供应商(1) |
| 3 |
|
[国标] GB /T 819.1 - 2000 |
十字槽沉头螺钉 4.8级 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供应商(13) |
| 4 |
|
[国标] GB /T 819.2 - 1997 |
十字槽沉头螺钉 第2部分：钢8.8级、不锈钢A2-70和有色金属螺钉CU2或CU3 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless and Non-Ferrous Metals 供应商(1) |
| 5 |
|
[国标] GB /T 13806.1 (B) - 1992 |
精密机械用紧固件十字槽沉头螺钉 Cross Recessed Countersunk Screws For Fine Mechanics 供应商(1) |
| 6 |
|
[国标] GB 819 - 1985 |
十字槽沉头螺钉 Cross Recessed Countersunk Head Screws 供应商(13) |
| 7 |
|
[国标] GB 819 - 1976 |
十字槽沉头螺钉 Cross recessed countersunk head screws 供应商(13) |
| 8 |
|
[德标] DIN 965 - 1990 |
十字槽沉头螺钉 Cross Recessed Countersunk Head Screws 供应商(6) |
| 9 |
|
[德标] DIN 34811 - 1999 |
塑料米字槽沉头螺钉 Plastic Flat Head Screws With Cross Recess |
| 10 |
|
[国际] ISO 7046 (-2) - 2011 |
8.8 级、不锈钢及有色金属 十字槽沉头螺钉 Countersunk Flat Head Screws(Common Head Style) With Type H Or Type Z Cross Recess-Product Grade A-Property Class 8.8 供应商(1) |
| 11 |
|
[国际] ISO 7046-2 - 1990 |
8.8 级、不锈钢及有色金属 十字槽沉头螺钉 Cross Recessed Countersunk Flat Head Screws(common Head Style) - Grade A - Steel Of Property Class 8.8,stainless Steel And Nonferrous Metals 供应商(1) |
| 12 |
|
[国际] ISO 7046 (-1) - 2011 |
4.8级十字槽沉头螺钉 Countersunk Flat Head Screws(Common Head Style)With Type H Or Type Z Cross Recess- Product Grade A-Steel Screws Of Property Class 4.8 |
| 13 |
|
[国际] ISO 5856 - 2008 |
航空航天 强度≤1100Mpa 金属材料 标准杆 短或中等长度MJ螺纹 偏十字槽 100°沉头螺钉 Aerospace - Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensi |
| 14 |
|
[国际] ISO 7046-1 - 1994 |
十字槽沉头螺钉 Cross recessed countersunk head screws |
| 15 |
|
[日标] JIS B 1111 (JA4) - 2017 |
十字槽沉头螺钉 [附属表 JA.4] Cross Recessed Countersunk Head Screws 供应商(2) |
| 16 |
|
[日标] JIS B 1111 (T6) - 2017 |
十字槽沉头螺钉 4.8级 [表6] Cross Recessed Countersunk Head Screws - Class 4.8 |
| 17 |
|
[日标] JIS B 1111 (T9) - 2017 |
十字槽沉头螺钉 8.8级 [表9] Cross Recessed Countersunk Head Screws - Class 8.8 |
| 18 |
|
[日标] JIS B 1111 (T2) - 2006 |
十字槽沉头螺钉 4.8级 [表2] Cross Recessed Countersunk Head Screws - Class 4.8 |
| 19 |
|
[日标] JIS B 1111 (T3) - 2006 |
十字槽沉头螺钉 8.8级 [表3] Cross Recessed Countersunk Head Screws - Class 8.8 |
| 20 |
|
[日标] JIS B 1111 (T3) - 1996 |
十字槽沉头螺钉 8.8级 [表3] Cross recessed countersunk head screws - Class 8.8 |
| 21 |
![十字槽沉头螺钉 4.8级 [表2]](http://img.164580.com/upload/48/pic/2024/03/22/1711077659454717016.jpg)
|
[日标] JIS B 1111 (T2) - 1996 |
十字槽沉头螺钉 4.8级 [表2] Cross recessed countersunk head screws-Class 4.8 |
| 22 |
|
[汽标代号] Q 254 |
十字槽沉头螺钉 Cross recessed countersunk head screws |
| 23 |
|
[美标] ASME/ANSI B 18.6.3 - 2010 |
十字槽沉头螺钉Table2 Cross recessed countersunk head screws 供应商(2) |
| 24 |
|
[美标] ASME/ANSI B 18.6.7M - 1998 |
米制十字槽沉头螺钉Table3 Metric cross recessed countersunk screws |
| 25 |
|
[美标] ASME/ANSI B 18.6.7M - 1998 |
米制米字槽沉头螺钉Table4 Metric PZ Drives countersunk head screws |
| 26 |
|
[欧标] EN 4162 - 2016 |
航空航天 - 100°沉头螺钉 偏十字槽 镀镉 合金钢 中等螺纹长度 粗公差普通杆 等级：1100MPa(室温)/235℃ Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C |
| 27 |
|
[欧标] EN 2940 - 1995 |
航空航天系列 镀银FE-PA92HT(A286)耐热钢制全螺纹偏置十字凹槽100°沉头螺钉 等级:900MPa(环境温度)/650 Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C |
| 28 |
|
[意大利] UNI 7688 - 1977 |
十字槽沉头螺钉 Cross Recessed Countersunk Head Screws |
| 29 |
|
[法国] NF E 25-119-1 - 1994 |
4.8级十字槽沉头螺钉 Countesunk Flat Head Screws,with Type H Or Type Z Cross Recessed - Product Grade A, Class 4.8 |
| 30 |
|
[法国] NF E 25-119-2 - 1994 |
8.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Grade A, Class 8.8 |
| 31 |
|
[英标] BS 1981 - 1991 |
米字槽沉头螺钉（短的）Table 7 Recessed Truncated Countersunk Head Screws:short Length |
| 32 |
|
[英标] BS 1981 - 1991 |
米字槽沉头螺钉Table4 Recessed Truncated Countersunk Head Screws: Long Length |
| 33 |
|
[英标] BS 450 - 1958 |
英制十字槽沉头螺钉 - B.S.W. & B.S.F. 螺纹 [Table 2] Cross Recessed 90° Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2] |
| 34 |
|
[澳标] AS /NZS 1427 - 1996 |
米制十字槽沉头螺钉 [Table 1] ISO metric cross-recess countersunk screws [Table 1] |
| 35 |
|
[台湾] CNS 4560 - 1981 |
十字槽沉头螺钉 Cross Recessed Countersunk Head Screws |
| 36 |
|
[俄标] GOST 17475 - 1980 |
十字槽沉头螺钉 A级和B级 Countersunk head screws of accuracy classes A and B (Cross Recessed) |
| 37 |
|
[韩标] KS B 1023 (T7) - 2016 (R2021) |
4.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Class 4.8 |
| 38 |
|
[韩标] KS B 1023 (T8) - 2016 (R2021) |
8.8级及有色金属十字槽沉头螺钉 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8 |
| 39 |
|
[韩标] KS B 1023 (T2) - 2001 |
4.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Class 4.8 |
| 40 |
|
[韩标] KS B 1023 (T3) - 2001 |
8.8级及有色金属十字槽沉头螺钉 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8 |
| 41 |
|
[德标] DIN EN ISO 7046-2 - 2011 |
8.8 级、不锈钢及有色金属 十字槽沉头螺钉 Countersunk Flat Head Screws(common Head Style) With Type H Or Type Z Cross Recess-product Grade A-property Class 8.8 供应商(5) |
| 42 |
|
[军标] GJB 3371 (/57~/60) - 1998 |
十字槽100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws |
| 43 |
|
[军标] GJB 3371 (/62) - 1998 |
光杆公差带f9 十字槽100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws，Shank Tolerance f9 |
| 44 |
|
[军标] GJB 3371 (/64) - 1998 |
光杆公差带h8短螺纹十字槽 100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance h8 |
| 45 |
|
[军标] GJB 3371 (/68) - 1998 |
十字槽 100°锥端沉头螺栓 Cross Recessed 100° Countersunk Head Screws With Cone Point |
| 46 |
|
[军标] GJB 3371 (/84) - 1998 |
光杆公差带r6短螺纹十字槽 100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance r6 |
| 47 |
|
[军标] GJB 3372 (/45~/48) - 1998 |
十字槽100°沉头螺钉 Cross Recessed 100° Countersunk Head Screws |
| 48 |
|
[军标] GJB 3372 (/49~/52) - 1998 |
十字槽100°小沉头螺钉 Cross recessed 100 ° small countersunk head screw |
| 49 |
|
[印标] IS 7485 (-1) - 2005 |
H型或Z型 十字槽沉头螺钉（普通头）产品等级A Countersunk flat head screws (common head style) with type H or Type Z cross recess - product grade A |
| 50 |
|
[印标] IS 7485 - 1985 (R2001) |
十字槽沉头螺钉 Cross recessed Countersunk head screws |
| 51 |
|
[波兰标] PN 82208 |
90°米字槽沉头螺钉 90° Cross Recess Countersunk Flat Head Screws |
| 52 |
![82°十字槽沉头螺钉 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA]](http://img.164580.com/upload/48/pic/2023/12/07/1701929142643948965.jpg)
|
[美标] ASME B 18.6.3 (H1B-I/H1B-IA) - 2024 |
82°十字槽沉头螺钉 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA] 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA] 供应商(2) |
| 53 |
|
[美标] ASME B 18.6.3 (T2-I/T2-IA) - 2013 |
82°十字槽沉头螺钉 [Table 2] (ASTM F837, F468) 82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468) 供应商(2) |
| 54 |
![100°十字槽沉头螺钉 (ASTM F837/F468) [TABLE 2.2.1-4 I/IA]](http://img.164580.com/upload/48/pic/2023/12/08/1702014577201150499.jpg)
|
[美标] ASME B 18.6.3 (H1D-I/H1D-IA) - 2024 |
100°十字槽沉头螺钉 (ASTM F837/F468) [TABLE 2.2.1-4 I/IA] 100° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-4 I/IA] |
| 55 |
|
[美标] ASME B 18.6.3 (H1F-I/H1F-IA) - 2024 |
精密100°沉头十字槽机械螺钉 [TABLE 2.2.1-6 I/IA] Close Tolerance 100-deg Flat Countersunk Head Screws [TABLE 2.2.1-6 I/IA] |
| 56 |
![十字槽82°沉头清根机械螺钉 I型和IA型 [TABLE 2.2.3-2 I/IA]](http://img.164580.com/upload/48/pic/2023/11/21/1700551788136057865.jpg)
|
[美标] ASME B 18.6.3 (H3B-I/H3B-IA) - 2024 |
十字槽82°沉头清根机械螺钉 I型和IA型 [TABLE 2.2.3-2 I/IA] Undercut 82-deg Flat Countersunk Head Screws,Type I and IA [TABLE 2.2.3-2 I/IA] |
| 57 |
![82°小沉头十字槽螺钉 (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA]](http://img.164580.com/upload/48/pic/2023/11/15/1700012688566954158.jpg)
|
[美标] ASME B 18.6.3 (H4A) - 2024 |
82°小沉头十字槽螺钉 (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA] 82° Flat Coutersunk Trim head Screws (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA] |
| 58 |
|
[美标] ASME B 18.6.3 (T13) - 2013 |
82°小沉头十字槽螺钉 [Table 13] (ASTM F837 / F468) 82° Flat Coutersunk Trim head Screws [Table 13] (ASTM F837 / F468) |
| 59 |
|
[美标] ASME B 18.6.3 (T4-I/T4-IA) - 2013 |
100°十字槽沉头螺钉 [Table 4] (ASTM F837, F468) 100° Cross Recessed Countersunk Head Screws [Table 4] (ASTM F837, F468) |
| 60 |
|
[美标] ASME B 18.6.3 (T6-I/T6-IA) - 2013 |
100°十字槽沉头精整螺钉 Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) |
| 61 |
|
[美标] ASME B 18.6.3 (T10-I/T10-IA) - 2013 |
十字槽82°沉头清根机械螺钉 Undercut 82-deg Flat Countersunk Head Screws，Type I and IA |
| 62 |
|
[航天] QJ 2584 (A) - 2011 |
钛合金十字槽沉头螺钉 Countersunk Head Screws With Cross Recess in Titanium Alloys |
| 63 |
|
[航天] QJ 2584 - 1993 |
钛合金十字槽沉头螺钉 Countersunk Head Screws With Cross Recess in Titanium Alloys |
| 64 |
|
[航天] QJ 2377 - 1992 |
十字槽沉头螺钉 Cross recessed countersunk head screws |
| 65 |
|
[航空] HB 1- 208 - 1995 |
十字槽120°沉头螺钉 Cross Recess 120° Countersunk Head Screw 供应商(1) |
| 66 |
|
[航空] HB 1-206 - 2002 |
十字槽90°沉头螺钉 90° Countersunk Head Screw with Cross Recess |
| 67 |
|
[航空] HB 7196~7199 (7196/7197/7198/7199) - 1995 |
十字槽100°沉头螺钉（带孔或不带孔） Cross Recessed 100° Countersunk Head Screws |
| 68 |
|
[航空] HB 6565 - 1992 |
钛合金光杆公差带f9高扭矩十字槽100°沉头螺栓 Titanium alloy smooth rod tolerance zone f9 high torque cross groove 100° countersunk head bolt |
| 69 |
|
[深圳紧固件行业协会标准] T/SZJGJ 001 (E) - 2024 |
十字槽沉头机器螺钉 Cross Recessed Countersunk Head Screws |
© 易紧通 服务热线：4006-164580（免长途费）