会员中心 | English | 繁體中文

航空航天强度≤1100Mpa 金属材料标准杆短或中等长度MJ螺纹偏十字槽 100°沉头螺钉 ISO 5856 - 2008

选择规格尺寸点击↓

030

040

050

060

070

080

100

120

140

160

180

200

ISO 5856 - 2008 航空航天强度≤1100Mpa 金属材料标准杆短或中等长度MJ螺纹偏十字槽 100°沉头螺钉

尺寸单位: mm

国际ISO 5856 - 2008 ISO5856 5856ISO 航空航天强度≤1100Mpa 金属材料标准杆短或中等长度MJ螺纹偏十字槽 100°沉头螺钉

扫一扫分享

公差最小破坏扭矩牌号等级

尺寸代码

030

040

050

060

070

080

100

120

140

160

180

200

D
D₁	公称
	有涂层 ①⑤	最大值
		最小值
	有涂层 ②	最大值
		最小值
	有涂层 ③	最大值
		最小值
	无涂层 ④	最大值
		最小值
	无涂层 ③	最大值
		最小值
D₂	最大值
D₃	最小值
D₄
D₅	公称
	最大值
	最小值
D₆ ^⑥	最小值=公称
	最大值
E	最小值
F	最大值
	最小值
H
L₁ ^⑦	±0.2
L₂	短的
	中等
L₃	短的
	中等

MJ3×0.5-4h6h	MJ4×0.7-4h6h	MJ5×0.8-4h6h	MJ6×1-4h6h	MJ7×1-4h6h	MJ8×1-4h6h	MJ10×1.25-4h6h	MJ12×1.25-4h6h	MJ14×1.5-4h6h	MJ16×1.5-4h6h	MJ18×1.5-4h6h	MJ20×1.5-4h6h
3	4	5	6	7	8	10	12	14	16	18	20
2.974	3.97	4.97	5.97	6.967	7.967	9.967	11.964	13.964	15.964	17.964	19.96
2.959	3.955	4.955	5.955	6.952	7.952	9.952	11.949	13.949	15.949	17.949	19.945
2.994	3.99	4.99	5.99	6.987	7.987	9.987	11.984	13.984	15.984	17.984	19.98
2.969	3.965	4.965	5.965	6.962	7.962	9.962	11.959	13.959	15.959	17.959	19.955
3	4	5	6	7	8	10	12	14	16	18	20
2.9	3.88	4.88	5.88	6.85	7.85	9.85	11.82	13.82	15.82	17.82	19.79
2.994	3.99	4.99	5.99	6.987	7.987	9.987	11.984	13.984	15.984	17.984	19.98
2.984	3.978	4.978	5.978	6.972	7.972	9.972	11.966	13.966	15.966	17.966	19.959
3	4	5	6	7	8	10	12	14	16	18	20
2.9	3.88	4.88	5.88	6.85	7.85	9.85	11.82	13.82	15.82	17.82	19.79
6	8	10	12	14	16	20	24	28	32	36	40
5.4	7.2	9	10.8	12.8	14.8	18.8	22.8	26.8	30.8	34.8	38.8
4.5	5.78	7.71	9	10.28	12.21	15.43	18	20.57	24.43	25.71	28.92
2.3	3	3.4	4.2	5.2	6.2	7.9	9.8	11.5	13.5	15.5	17.5
2.3	3	3.9	4.7	5.7	6.7	8.4	10.3	12	14	16	18
1.8	2.5	2.9	3.7	4.7	5.7	7.4	9.3	11	13	15	17
/	1.1	1.5	1.5	1.9	1.9	2.4	2.4	3	3	3.8	3.8
/	1.24	1.64	1.64	2.04	2.04	2.54	2.54	3.14	3.14	3.98	3.98
0.06	0.08	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
0.63	0.93	0.96	1.26	1.57	1.6	1.93	2.53	3.14	3.2	4.35	4.68
0.55	0.85	0.88	1.18	1.49	1.52	1.85	2.45	3.06	3.12	4.27	4.6
1.27	1.69	2.12	2.54	2.96	3.39	4.23	5.08	5.93	6.77	7.62	8.47
3~30	3~40	4~50	5~60	6~70	6~80	8~100	10~120	10~140	10~160	11~180	12~200
6	7.5	9	10	11	11.5	14.5	16	19	20.5	22.5	24.5
7.5	10	12	14	15	16.5	20.5	22.5	26	28.5	31	33.5
/	5	6	7	7	7.5	9	10	12	12.5	14.5	15
/	6	7.5	8.5	9.5	10.5	13	14.5	17	18.5	21	22.5

①,涂装前
②,紧公差
③,松公差（h12）
④,紧公差 (f7)
⑤,热固化有机基体涂层，适用于精密公差的标准杆。
⑥,公差H13，单孔，可选
⑦,递增长度：当 L1≤30时为1mm；当 30＜L1≤100时为2mm；当 L1＞100时为4mm。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

紧固件 - 螺栓、螺钉和螺柱 - 公称长度和螺纹长度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 一般要求

GB /T 5779.3 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 特殊要求

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 819.1 - 2016	十字槽沉头螺钉第1部分：4.8级 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供应商(13)
2	[国标] GB /T 819.2 - 2016	十字槽沉头螺钉第2部分：8.8级、不锈钢及有色金属螺钉 Countersunk Flat Head Screws with Cross Recess - Part 2: Property Class 8.8, Stainless Steel Screws and Non-ferrous Metal Screws 供应商(1)
3	[国标] GB /T 819.1 - 2000	十字槽沉头螺钉 4.8级 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供应商(13)
4	[国标] GB /T 819.2 - 1997	十字槽沉头螺钉第2部分：钢8.8级、不锈钢A2-70和有色金属螺钉CU2或CU3 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless and Non-Ferrous Metals 供应商(1)
5	[国标] GB /T 13806.1 (B) - 1992	精密机械用紧固件十字槽沉头螺钉 Cross Recessed Countersunk Screws For Fine Mechanics 供应商(1)
6	[国标] GB 819 - 1985	十字槽沉头螺钉 Cross Recessed Countersunk Head Screws 供应商(13)
7	[国标] GB 819 - 1976	十字槽沉头螺钉 Cross recessed countersunk head screws 供应商(13)
8	[德标] DIN 965 - 1990	十字槽沉头螺钉 Cross Recessed Countersunk Head Screws 供应商(6)
9	[德标] DIN 34811 - 1999	塑料米字槽沉头螺钉 Plastic Flat Head Screws With Cross Recess
10	[国际] ISO 7046 (-2) - 2011	8.8 级、不锈钢及有色金属十字槽沉头螺钉 Countersunk Flat Head Screws(Common Head Style) With Type H Or Type Z Cross Recess-Product Grade A-Property Class 8.8 供应商(1)
11	[国际] ISO 7046-2 - 1990	8.8 级、不锈钢及有色金属十字槽沉头螺钉 Cross Recessed Countersunk Flat Head Screws(common Head Style) - Grade A - Steel Of Property Class 8.8,stainless Steel And Nonferrous Metals 供应商(1)
12	[国际] ISO 7046 (-1) - 2011	4.8级十字槽沉头螺钉 Countersunk Flat Head Screws(Common Head Style)With Type H Or Type Z Cross Recess- Product Grade A-Steel Screws Of Property Class 4.8
13	[国际] ISO 7046-1 - 1994	十字槽沉头螺钉 Cross recessed countersunk head screws
14	[日标] JIS B 1111 (JA4) - 2017	十字槽沉头螺钉 [附属表 JA.4] Cross Recessed Countersunk Head Screws 供应商(2)
15	[日标] JIS B 1111 (T6) - 2017	十字槽沉头螺钉 4.8级 [表6] Cross Recessed Countersunk Head Screws - Class 4.8
16	[日标] JIS B 1111 (T9) - 2017	十字槽沉头螺钉 8.8级 [表9] Cross Recessed Countersunk Head Screws - Class 8.8
17	[日标] JIS B 1111 (T2) - 2006	十字槽沉头螺钉 4.8级 [表2] Cross Recessed Countersunk Head Screws - Class 4.8
18	[日标] JIS B 1111 (T3) - 2006	十字槽沉头螺钉 8.8级 [表3] Cross Recessed Countersunk Head Screws - Class 8.8
19	[日标] JIS B 1111 (T3) - 1996	十字槽沉头螺钉 8.8级 [表3] Cross recessed countersunk head screws - Class 8.8
20	[日标] JIS B 1111 (T2) - 1996	十字槽沉头螺钉 4.8级 [表2] Cross recessed countersunk head screws-Class 4.8
21	[汽标代号] Q 254	十字槽沉头螺钉 Cross recessed countersunk head screws
22	[美标] ASME/ANSI B 18.6.3 - 2010	十字槽沉头螺钉Table2 Cross recessed countersunk head screws 供应商(2)
23	[美标] ASME/ANSI B 18.6.7M - 1998	米制十字槽沉头螺钉Table3 Metric cross recessed countersunk screws
24	[美标] ASME/ANSI B 18.6.7M - 1998	米制米字槽沉头螺钉Table4 Metric PZ Drives countersunk head screws
25	[欧标] EN 4162 - 2016	航空航天 - 100°沉头螺钉偏十字槽镀镉合金钢中等螺纹长度粗公差普通杆等级：1100MPa(室温)/235℃ Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C
26	[欧标] EN 2940 - 1995	航空航天系列镀银FE-PA92HT(A286)耐热钢制全螺纹偏置十字凹槽100°沉头螺钉等级:900MPa(环境温度)/650 Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
27	[意大利] UNI 7688 - 1977	十字槽沉头螺钉 Cross Recessed Countersunk Head Screws
28	[法国] NF E 25-119-1 - 1994	4.8级十字槽沉头螺钉 Countesunk Flat Head Screws,with Type H Or Type Z Cross Recessed - Product Grade A, Class 4.8
29	[法国] NF E 25-119-2 - 1994	8.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Grade A, Class 8.8
30	[英标] BS 1981 - 1991	米字槽沉头螺钉（短的）Table 7 Recessed Truncated Countersunk Head Screws:short Length
31	[英标] BS 1981 - 1991	米字槽沉头螺钉Table4 Recessed Truncated Countersunk Head Screws: Long Length
32	[英标] BS 450 - 1958	英制十字槽沉头螺钉 - B.S.W. & B.S.F. 螺纹 [Table 2] Cross Recessed 90° Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2]
33	[澳标] AS /NZS 1427 - 1996	米制十字槽沉头螺钉 [Table 1] ISO metric cross-recess countersunk screws [Table 1]
34	[台湾] CNS 4560 - 1981	十字槽沉头螺钉 Cross Recessed Countersunk Head Screws
35	[俄标] GOST 17475 - 1980	十字槽沉头螺钉 A级和B级 Countersunk head screws of accuracy classes A and B (Cross Recessed)
36	[韩标] KS B 1023 (T7) - 2016 (R2021)	4.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Class 4.8
37	[韩标] KS B 1023 (T8) - 2016 (R2021)	8.8级及有色金属十字槽沉头螺钉 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8
38	[韩标] KS B 1023 (T2) - 2001	4.8级十字槽沉头螺钉 Cross Recessed Countersunk Head Screws - Class 4.8
39	[韩标] KS B 1023 (T3) - 2001	8.8级及有色金属十字槽沉头螺钉 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8
40	[德标] DIN EN ISO 7046-1 - 2011	十字槽沉头螺钉（通用头型）- 4.8级，钢制，产品等级A级 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 供应商(6)
41	[德标] DIN EN ISO 7046-2 - 2011	8.8 级、不锈钢及有色金属十字槽沉头螺钉 Countersunk Flat Head Screws(common Head Style) With Type H Or Type Z Cross Recess-product Grade A-property Class 8.8 供应商(5)
42	[军标] GJB 3371 (/57~/60) - 1998	十字槽100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws
43	[军标] GJB 3371 (/62) - 1998	光杆公差带f9 十字槽100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws，Shank Tolerance f9
44	[军标] GJB 3371 (/64) - 1998	光杆公差带h8短螺纹十字槽 100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance h8
45	[军标] GJB 3371 (/68) - 1998	十字槽 100°锥端沉头螺栓 Cross Recessed 100° Countersunk Head Screws With Cone Point
46	[军标] GJB 3371 (/84) - 1998	光杆公差带r6短螺纹十字槽 100°沉头螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance r6
47	[军标] GJB 3372 (/45~/48) - 1998	十字槽100°沉头螺钉 Cross Recessed 100° Countersunk Head Screws
48	[军标] GJB 3372 (/49~/52) - 1998	十字槽100°小沉头螺钉 Cross recessed 100 ° small countersunk head screw
49	[印标] IS 7485 (-1) - 2005	H型或Z型十字槽沉头螺钉（普通头）产品等级A Countersunk flat head screws (common head style) with type H or Type Z cross recess - product grade A
50	[印标] IS 7485 - 1985 (R2001)	十字槽沉头螺钉 Cross recessed Countersunk head screws
51	[波兰标] PN 82208	90°米字槽沉头螺钉 90° Cross Recess Countersunk Flat Head Screws
52	[美标] ASME B 18.6.3 (H1B-I/H1B-IA) - 2024	82°十字槽沉头螺钉 (ASTM F837, F468) 82° Cross Recessed Countersunk Head Screws (ASTM F837, F468) 供应商(2)
53	[美标] ASME B 18.6.3 (T2-I/T2-IA) - 2013	82°十字槽沉头螺钉 [Table 2] (ASTM F837, F468) 82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468) 供应商(2)
54	[美标] ASME B 18.6.3 (H1D-I/H1D-IA) - 2024	100°十字槽沉头螺钉 (ASTM F837, F468) 100° Cross Recessed Countersunk Head Screws (ASTM F837, F468)
55	[美标] ASME B 18.6.3 (H1F-I/H1F-IA) - 2024	100°十字槽沉头精整螺钉 Close Tolerance 100-deg Flat Countersunk Head Screws
56	[美标] ASME B 18.6.3 (H3B-I/H3B-IA) - 2024	十字槽82°沉头清根机械螺钉 Undercut 82-deg Flat Countersunk Head Screws，Type I and IA
57	[美标] ASME B 18.6.3 (H4A) - 2024	82°小沉头十字槽螺钉 (ASTM F837 / F468) 82° Flat Coutersunk Trim head Screws (ASTM F837 / F468)
58	[美标] ASME B 18.6.3 (T13) - 2013	82°小沉头十字槽螺钉 [Table 13] (ASTM F837 / F468) 82° Flat Coutersunk Trim head Screws [Table 13] (ASTM F837 / F468)
59	[美标] ASME B 18.6.3 (T4-I/T4-IA) - 2013	100°十字槽沉头螺钉 [Table 4] (ASTM F837, F468) 100° Cross Recessed Countersunk Head Screws [Table 4] (ASTM F837, F468)
60	[美标] ASME B 18.6.3 (T6-I/T6-IA) - 2013	100°十字槽沉头精整螺钉 Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
61	[美标] ASME B 18.6.3 (T10-I/T10-IA) - 2013	十字槽82°沉头清根机械螺钉 Undercut 82-deg Flat Countersunk Head Screws，Type I and IA
62	[航天] QJ 2584 (A) - 2011	钛合金十字槽沉头螺钉 Countersunk Head Screws With Cross Recess in Titanium Alloys
63	[航天] QJ 2584 - 1993	钛合金十字槽沉头螺钉 Countersunk Head Screws With Cross Recess in Titanium Alloys
64	[航天] QJ 2377 - 1992	十字槽沉头螺钉 Cross recessed countersunk head screws
65	[航空] HB 1- 208 - 1995	十字槽120°沉头螺钉 Cross Recess 120° Countersunk Head Screw 供应商(1)
66	[航空] HB 1-206 - 2002	十字槽90°沉头螺钉 90° Countersunk Head Screw with Cross Recess
67	[航空] HB 7196~7199 (7196/7197/7198/7199) - 1995	十字槽100°沉头螺钉（带孔或不带孔） Cross Recessed 100° Countersunk Head Screws
68	[航空] HB 6565 - 1992	钛合金光杆公差带f9高扭矩十字槽100°沉头螺栓 Titanium alloy smooth rod tolerance zone f9 high torque cross groove 100° countersunk head bolt
69	[深圳紧固件行业协会标准] T/SZJGJ 001 (E) - 2024	十字槽沉头机器螺钉 Cross Recessed Countersunk Head Screws