会员中心 | English | 繁體中文

铁帽铁芯封闭型圆头抽芯铆钉 ISO 15976 - 2002

选择规格尺寸点击↓

Φ3.2

Φ4

Φ4.8

Φ6.4

尺寸单位: mm

国际ISO 15976 - 2002 ISO15976 15976ISO 铁帽铁芯封闭型圆头抽芯铆钉

扫一扫分享

单重计算公差

公称直径
d

Φ3.2

Φ4

Φ4.8

Φ6.4

d	最大值
	最小值
d_k	最大值
	最小值
k	最大值
d₁	最大值
L₁	最小值
剪切载荷/N(min)
拉力载荷/N(min)
钉芯断裂载荷/N(max)

3.28	4.08	4.88	6.48
3.05	3.85	4.65	6.25
6.7	8.4	10.1	13.4
5.8	6.9	8.3	11.6
1.3	1.7	2	2.7
2	2.35	2.95	3.9
25	25	27	27
1150	1700	2400	3600
1300	1550	2800	4000
4000	5700	7500	10500

推荐的铆接范围

替代列表

暂无

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 12615.2 修改采用 ISO 15976:2002	ISO 15976	DIN EN ISO 15976

以上有部分标准可能为近似等效，如有异议以标准原件为准

工艺相关

技术条件和引用标准

材料
表面处理
表面缺陷
验收及包装

Blind rivets in accordance with this International Standard shall have a rivet body made of of steel (St) and a mandrel made of steel (St).
Material specification is at the discretion of the manufacturer.

The surface of rivet body and mandrel shall be zinc plated 5 μm minimum in accordance with ISO 4042 measuredat the rivet head.
The chromate conversion coating shall be c2C in accordance with ISO 4520:1981.
The complete finish designation is then Fe/Zn5c2C.

Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.

ISO 3269

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

宁波超鑫铆钉制造有限公司

联系人：吴铁洲移动电话： 15906744333 电话：0574-63313978 Email:

登陆后可见

材料：铜、铝、铁、不锈钢；规格：齐全；表面处理：按照客户的要求

[询价]

东莞市锐宇达五金制品有限公司

联系人：钟卫琳/彭小姐点击这里给我发消息

1094583699 移动电话： 13823190731/13825794062 电话：0769-85630321/85605962 Email:

登陆后可见

材料：不锈钢、铝、铜、碳钢；表面处理：按客户要求，产品范围：规格齐全

[询价]

上海承泰金属五金制造有限公司

联系人：诸葛鸿满

2880137050 点击这里给我发消息

2880137059 移动电话： 18916049888 电话：021-59742477/59740118 Email:

登陆后可见

材质：不锈钢、铝、碳钢；规格：齐全；表面处理：根据客户要求

[询价]

慈溪市钉晟紧固件有限公司

联系人：励晨莹/励家豪点击这里给我发消息

469369214 移动电话： 15158363879/18258728198 电话：15158363879/18258728198 微信号：15158363879/18258728198 Email:

登陆后可见

材质：不锈钢，全铁，铝等；规格尺寸齐全；表面处理可根据客户需求，现货充足。

[询价]

告诉我在“易紧通”看到，将给您优惠

类似标准及供货信息

1	[国标] GB /T 12615.1 - 2004	封闭型平圆头抽芯铆钉 11级（铝钉，钢芯） Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 11 - AlA/St 供应商(7)
2	[国标] GB /T 12615.2 - 2004	封闭型平圆头抽芯铆钉 30级钢制 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 30 - St / St 供应商(7)
3	[国标] GB /T 12615.3 - 2004	封闭型平圆头抽芯铆钉 06级铝制 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 06 - Al/AlA 供应商(7)
4	[国标] GB /T 12615.4 - 2004	封闭型平圆头抽芯铆钉 51级不锈钢 Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 51 - A2/SSt 供应商(7)
5	[国标] GB /T 12615 - 1990	封闭型扁圆头抽芯铆钉 Mushroom Head Break Mandrel Closed End Blind Rivets 供应商(7)
6	[美标] IFI 126 - 2003	封闭型圆头抽芯铆钉 Dome Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
7	[美标] IFI 509 - 1999	米制封闭型圆头抽芯铆钉 Metric Mushroom Head Break Mandrel Closed End Blind Rivets 供应商(1)
8	[国际] ISO 15975 - 2002	铝帽铝芯封闭型圆头抽芯铆钉 Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA 供应商(3)
9	[国际] ISO 16585 - 2002	全不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt 供应商(3)
10	[国际] ISO 15973 - 2000	铝帽铁芯封闭型半圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St 供应商(4)
11	[汽标代号] Q 442	封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets 供应商(3)
12	[汽标代号] Q 442B	封闭型平圆头抽芯铆钉 06级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head 供应商(3)
13	[汽标代号] Q 442B (T18)	封闭型平圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - Property Class 11 供应商(3)
14	[法国] NF E 25-725 - 2003	不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head - A2/SSt 供应商(1)
15	[法国] NF E 25-712 - 2003	铝帽铝芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AI/AIA
16	[法国] NF E 25-713 - 2003	铁帽铁芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
17	[法国] NF E 25-710 - 2001	铝帽铁芯封闭型半圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
18	[企标] YJT 8036	封闭型圆头抽芯铆钉 Dome Head Style Break Mandrel Closed End Blind Rivets 供应商(1)
19	[德标] DIN EN ISO 15975 - 2003	铝帽铝芯封闭型圆头抽芯铆钉 Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA
20	[德标] DIN EN ISO 15976 - 2003	铁帽铁芯封闭型圆头抽芯铆钉 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
21	[德标] DIN EN ISO 16585 - 2003	全不锈钢封闭型盘头抽芯铆钉 Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt
22	[德标] DIN EN ISO 15973 - 2001	铝帽铁芯封闭型半圆头抽芯铆钉 11级 Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St