DIN 609 - 2016 Hexagon Fits Bolts With Long Thread

Unit: 毫米(mm)

Thread Size
d

M10

M12

P	Pitch	Coarse thread
		Fine thread-1
		Fine thread-2
b	L≤50
	50＜L≤ 150
	L＞150
d_s	Nominal Size (K6)
	min
	max
d₀	min
	max
e	min
k	Nominal Size
	min
	max
k₁	min
r	min
	max
s	max=nominal size
	min

1.25	1.5	1.75
1	1.25	1.25
-	1	1.5
14.5	17.5	20.5
16.5	19.5	22.5
21.5	24.5	27.5
9	11	13
9.001	11.001	13.001
9.01	11.012	13.012
7.9	9.9	11.5
8.2	10.2	11.8
14.38	17.77	19.85
5.3	6.4	7.5
5.15	6.22	7.21
5.45	6.58	7.79
3.61	4.35	5.05
0.4	0.4	0.6
0.55	0.55	0.75
13	16	18
12.73	15.73	17.57

Lg (max)

per 1000 units ≈ kg(7.85kg/cm3)

①,Centering hole Form A or Form R according to DIN 332-1 (centering is only required for screws with addition [larger shank diameter ds], for screws without added [finish screws] it is left to the manufacturer.)
②,Material: a)Steel, Strength class: d≤39mm:8.8；d>39mm according to agreements . Standard DIN EN ISO 898-1 b)Stainless steel, Strength class: d≤20mm：A2-70；2039mm according to agreement. Standard DIN EN ISO 3506-1, DIN EN ISO 3506-3 c)Non-ferrous metal, Property class:CU2，CU3. Standard DIN EN 28839

DIN 609 - 2016 Hexagon Fits Bolts With Long Thread

DIN 609 - 1995

DIN 610 - 1993

DIN 609 - 1984

DIN 7968 - 2017

DIN 7968 - 1989

DIN 7999 - 1983

EN 14399-8 (Fit bolt) - 2018

EN 14399-8 (Fit bolt) - 2007

NF E 25-801-8 - 2008

CNS 3125 - 1980

DIN EN 14399-8 (fit bolt) - 2008