GB /T 222 - 2006
Permissible tolerances for chemical composition of steel products
GB /T 1172 - 1999
Conversion of hardness and strength for ferrous metal
GB /T 716 - 1991
Cold-rolled carbon structural steel strips
GB 3206 - 1982
Carbon Constructional Quality Steel Wires
GB /T 4232 - 2019
Stainless steel wire for cold heading and cold forging
GB /T 4240 - 2019
Stainless steel wires
GB /T 15007 - 2017
Designations of corrosion-resistant alloy
GB /T 4356 - 2016
Stainless steel wire rod
GB /T 3280 - 2015
Cold rolled stainless steel plate and strip
GB /T 4238 - 2015
Heat-resisting steel plate , sheet and strip
GB /T 6478 - 2015
Steels For Cold Heading And Cold Extruding
GB /T 699 - 2015
Quality carbon structure steels
GB /T 31303 - 2014
Austenitic-Ferritic duplex stainless steel bars
GB /T 24588 - 2009
Stainless steel wires for spring
GB /T 4240 - 2009
Stainless steel wires
GB /T 1591 - 2008
High Strength Low Alloy Structural Steels
GB /T 21833 - 2008
Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes
GB /T 8731 - 2008
Free-Cutting Structural Steel
GB /T 1220 - 2007
Stainless Steel Bars
GB /T 1221 - 2007
Heat-resistant Steel Bars
GB /T 1222 - 2007
Spring Steels
GB /T 20878 - 2007
Stainless and heat-resisting steels - Designation and chemical composition
GB /T 20410 - 2006
Steels for turbine bolts at high temperature
GB /T 700 - 2006
Carbon Structural Steels
GB /T 14992 - 2005
Classification and designation for superalloys and high temperature intermetallic materials
GB /T 5216 - 2004
Structural Steels Subject to End-quench Hardenability Requirments
GB 4234 - 2003
GB /T 18254 - 2002
High-carbon Chromium Bearing Steel
GB T 6478 - 2001
Steels for cold heading and cold extruding
GB /T 3077 - 1999
Alloy Structure Steels
GB /T 699 - 1999
Quality Carbon Structural Steels
GB /T 17107 - 1997
Structural Steel Grades And Mechanical Property For Forgings
GB /T 1220 - 1992
Stainless steel bars
GB /T 4239 - 1991
Cold rolled stainless steel and heatresisting steel strip
GB /T 1299 - 1985
DIN 17400 - 1996
DIN 1654-2 - 1989
Cold heading and extruding steels Technical delivery conditions for killed unalloyed steels not intended for heat treatment
DIN 1651 - 1988
Free-cutting steels technical delivery conditions
DIN 17200 - 1987
DIN 17210 - 1986
Case hardening steel coil
DIN 17224 - 1982
Stainless steel wire and strip for springs Technical delivery and conditions
DIN 17100 - 1980
Steels for General Structural Purposes Quality Standard
DIN 17230 - 1980
Ball and Roller Bearing Steels Technical Conditions of Delivery
DIN 17440 - 1972
Stainless steel quality standards
ISO 1127 - 1992
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
ISO 3304 - 1985
Plain end seamless precision steel tubes - Technical conditions for delivery
ISO 3305 - 1985
Plain end welded precision steel tubes - Technical conditions for delivery
ISO 4955 - 2005
Heat-resistant Steels
ISO 683-14 - 2004
Heat-treatable steels,alloy steels and free-cutting steels. Part 14:Hot-rolled steels for quenched and tempered springs third edition
ISO TS 15510 - 2003
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
ISO 8458-2 - 2002
Steel wire for mechanical springs — Part 2: Patented cold-drawn non-alloy steel wire
ISO 8458-3 - 2002
Steel wire for mechanical springs. Part 3:Oil-hardened and tempered wire second edition
ISO 4951-2 - 2001
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
ISO 9327 (-5) - 1999
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
ISO 9327 (-3) - 1999
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties
ISO 683-18 - 1996
Heat-treatable steels, alloy steels and free-cutting steels
ISO 4950-2 - 1995
High yield strength flat steel products
ISO 630 - 1995 (R2003)
Structural steels--Plates,wide flats,bars,sections and profiles
ISO 4955 - 1994
Heat-resistant Steels and Alloy
ISO 4954 - 1993
Steels for cold heading and cold extruding second edition
ISO 683-9 - 1988
Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels
ISO 683-1 - 1987
Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts
ISO 683-11 - 1987
heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steels
ISO 683-13 - 1986
Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels
ISO 683-16 - 1976
Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels
JIS G 4308 - 2013
Stainless steel wire rods
JIS G 3101 - 2011
Rolled steels for general structure
JIS G 3131 - 2010
Hot-rolled mild steel plates,sheets and strip
JIS G 3141 - 2009
JIS G 4804 - 2008
Free-cutting steels
JIS G 4805 - 2008
High carbon chromium bearing steels
JIS G 4401 - 2006
JIS G 3507-1 - 2005
Carbon steels for cold heading -- Wire rods
JIS G 3508-1 - 2005
Boron steels for cold heading. Part 1:Wire rods
JIS G 4051 - 2005
JIS G 4202 - 2005
JIS G 4303 - 2005
Stainless steel bars
JIS G 4304 - 2005
Hot-rolled stainless steel plate,sheet and strip
JIS G 4305 - 2005
Cold-rolled stainless steel plate,sheet and strip
JIS G 4801 - 2005
Spring steels
JIS G 4802 - 2005
Cold-rolled steel strips for springs
JIS G 3124 - 2004
Cold finished carbon and alloy steel bars
JIS G 3459 - 2004
Stainless steel pipes
JIS G 3509-1 - 2003
Low-alloyed steels for cold heading. Part 1:Wire rods
JIS G 4052 - 2003
Structural steels with specified hardenability bands
JIS G 4053 - 2003
Alloy steel plate for machinery
JIS G 4315 - 2000
Stainless steel wires for cold heading and cold forging
JIS G 7401 - 2000
Steels for cold heading and cold extruding
JIS G 4309 - 1999
Stainless steel wires
JIS G 3474 - 1995
JIS G 4311 - 1991
Heat-resisting steel bars and wire rods
JIS G 4312 - 1991
Heat-resisting steel plate,sheet and strip
JIS G 5111 - 1991
High tensile strength carbon steel castings and low alloy steel castings structural purposes
EN 3018 - 2019
Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm
EN 2947 - 2006
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm
EN 10269 - 2013
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10305-1 - 2010
EN 10028-2 - 2009
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3 - 2009
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
EN 10208-2 - 2009
Steel pipes for pipelines for combustible fluids. Technical delivery conditions
