index
logo

螺尾锥销 DIN EN 28737 - 1992

选择规格尺寸 点击↓

5

6

8

10

12

16

20

25

30

40

50

DIN EN  28737 - 1992 螺尾锥销

尺寸单位: mm
德标DIN EN 28737 - 1992 DIN EN28737 28737D 螺尾锥销
DIN EN  28737 - 1992 螺尾锥销
扫一扫分享
千件重及价格计算 千件重 : kg x 元/kg = 元/千件
默认密度 g/cm3
公称长度L 注:选择后获得 相应重量
公称直径
d
5 6 8 10 12 16 20 25 30 40 50
d 最大值=公称 (h10)
最小值
a 最大值
b 最大值
最小值
d2
P 螺距
dp 最大值
最小值
z 最大值
最小值
5 6 8 10 12 16 20 25 30 40 50
4.952 5.952 7.942 9.942 11.93 15.93 19.916 24.916 29.916 39.9 49.9
2.4 3 4 4.5 5.3 6 6 7.5 9 10.5 12
15.6 20 24.5 27 30.5 39 39 45 52 65 78
14 18 22 24 27 35 35 40 46 58 70
M5 M6 M8 M10 M12 M16 M16 M20 M24 M30 M36
0.8 1 1.25 1.5 1.75 2 2 2.5 3 3.5 4
3.5 4 5.5 7 8.5 12 12 15 18 23 28
3.25 3.7 5.2 6.6 8.1 11.5 11.5 14.5 17.5 22.5 27.5
1.5 1.75 2.25 2.75 3.25 4.3 4.3 5.3 6.3 7.5 9.4
1.25 1.5 2 2.5 3 4 4 5 6 7 9
千件钢制重≈kg
- - - - - - - - - - -
①,材料:
a)St=易切削钢,硬度HV125~245
b)其他材料按协议
替代列表
等效标准
国标 GB 国际 ISO 德标 DIN
GB /T 881
ISO 8737
DIN EN 28737
以上有部分标准可能为近似等效,如有异议以标准原件为准

技术条件和引用标准

螺纹
材料
表面处理
表面缺陷
验收及包装
6g,ISO 965
St = 易切削钢
硬度 125 ~ 245 HV
其他材料由供需双方协议
* plain , i.e. pins to be supplied in natural finish treated with a rust-preventative lubricant, unless otherwise specified by agreement between customer and supplier.
* Preferred coatings are black oxide, phosphate coating or zinc plating with chromate conversion coating (see ISO 2081 and ISO 4520).
* Other coatings as agreed between customer and supplier.
* All tolerances shall apply prior to the application of a plating or coating.
Parts shall be uniform in quality and free of irregularities or detrimental defects .No burrs shall appear on any part of the pin.
ISO 3269
注:技术数据仅供参考,请以官方原件为准!
告诉我在“易紧通”看到,将给您优惠
联系人:郑坤   移动电话: 13967788091     电话:0577-65201156 Email: 登陆后可见
材料:不锈钢、中碳、40Cr、Gcr15;规格范围:M5-M36
类似标准及供货信息
1 螺尾锥销 [国标]
GB /T 881 - 2000
螺尾锥销
Taper Pins With External Thread
供应商(2)
2 螺尾锥销 [国标]
GB 881 - 1986
螺尾锥销
Taper Pins With External Thread
供应商(2)
3 螺尾销轴 [国标]
GB 881 - 1976
螺尾销轴
Clevis pins with head and external thread
供应商(2)
4 螺尾锥销 [德标]
DIN 258 - 2012
螺尾锥销
Taper Pins With Thread Ends And Constant Taper Lengths
供应商(1)
5 带螺纹圆锥销 [德标]
DIN 258 - 2011
带螺纹圆锥销
Taper pins with thread ends and constant taper lengths
供应商(1)
6 螺尾锥销 [德标]
DIN 7977 - 1986
螺尾锥销
Taper Pins With External Thread
供应商(1)
7 螺尾锥销 [德标]
DIN 258 - 1977
螺尾锥销
Taper pins with thread ends and constant taper lengths
供应商(1)
8 螺尾锥销 [德标]
DIN 7977 - 1977
螺尾锥销
Taper Pins With Thread And Constant Thread Part
供应商(1)
9 不淬硬螺尾锥销 [国际]
ISO 8737 - 1986
不淬硬螺尾锥销
Taper Pins With External Thread,Unhardened
10 外螺纹球面圆柱端圆锥销 [日标]
JIS B 1358 - 1990
外螺纹球面圆柱端圆锥销
Taper Pins With Dog Point And Ball Face
11 带螺纹圆锥销 [意大利]
UNI 7285 - 1974
带螺纹圆锥销
Taper Pins With Thread And Constant Taper Length
12 不淬硬带螺纹圆锥销 [法国]
NF E 25-759 - 1992 (R2002)
不淬硬带螺纹圆锥销
Taper Pins With External Thread, Unhardened
13 带螺纹圆锥销 [韩标]
KS B 1308 - 2021
带螺纹圆锥销
Taper Pins With Thread
14 带螺纹圆锥销 [韩标]
KS B 1308 - 2000
带螺纹圆锥销
Taper Pins With Thread
© 易紧通 服务热线:4006-164580(免长途费)