会员中心 | English | 繁體中文

开口型圆头抽芯铆钉—铝帽铁芯 DIN EN ISO 15977 - 2011

选择规格尺寸点击↓

Φ2.4

Φ3

Φ3.2

Φ4

Φ4.8

Φ5

Φ6

Φ6.4

尺寸单位: mm

德标DIN EN ISO 15977 - 2011 DIN EN ISO1597 开口型圆头抽芯铆钉—铝帽铁芯

模型下载替

扫一扫分享

单重计算公差

公称直径
d

Φ2.4

Φ3

Φ3.2

Φ4

Φ4.8

Φ5

Φ6

Φ6.4

d	最大值
	最小值
d_k	最大值
	最小值
k	最大值
d₁	最大值
L₁	最小值
b	最大值
安装孔尺寸	最小值
	最大值
最小剪切载荷(N)-L级
最小剪切载荷(N)-H级
最小拉力载荷(N)-L级
最小拉力载荷(N)-H级
最大钉芯断裂载荷(N)
钉头保持试验载荷/N

2.48	3.08	3.28	4.08	4.88	5.08	6.08	6.48
2.25	2.85	3.05	3.85	4.65	4.85	5.85	6.25
5.0	6.3	6.7	8.4	10.1	10.5	12.6	13.4
4.2	5.4	5.8	6.9	8.3	8.7	10.8	11.6
1	1.3	1.3	1.7	2	2.1	2.5	2.7
1.55	2	2	2.45	2.95	2.95	3.4	3.9
25	25	25	27	27	27	27	27
L(max)+3.5	L(max)+3.5	L(max)+4	L(max)+4	L(max)+4.5	L(max)+4.5	L(max)+5	L(max)+5.5
2.5	3.1	3.3	4.1	4.9	5.1	6.1	6.5
2.6	3.2	3.4	4.2	5.0	5.2	6.2	6.6
250	400	500	850	1200	1400	2100	2200
350	550	750	1250	1850	2150	3200	3400
350	550	700	1200	1700	2000	3000	3150
550	850	1100	1800	2600	3100	4600	4850
2000	3000	3500	5000	6500	6500	9000	11000
10	15	15	20	25	25	30	50

①,材料：铝合金（AlA）及钢(St)为铆钉主体和钉芯材料, 并应具有第5条规定的机械性能（见原件表3）。材料规格由制造商决定。

替代列表

DIN 7337(A) - 1991 DIN EN ISO 15977 - 2011

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 12618.1	ISO 15977	DIN EN ISO 15977

以上有部分标准可能为近似等效，如有异议以标准原件为准

采用标准

ISO 15977 - 2002

铝帽铁芯开口型圆头抽芯铆钉

技术条件和引用标准

材料
Mandrel push-out resistance
表面处理
表面缺陷
验收及包装

Blind rivets in accordance with this International Standard shall have a rivet body made of of aluminium alloy (AlA) and a mandrel made of steel (St).
Material specification is at the discretion of the manufacturer.

The load to push out the mandrel shall exceed 10 N when tested in accordance with ISO 14589.

The surface of rivet body and mandrel shall be zinc plated 5 μm minimum in accordance with ISO 4042 measuredat the rivet head.
The chromate conversion coating shall be c2C in accordance with ISO 4520:1981.
The complete finish designation is then Fe/Zn5c2C.

Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.

ISO 3269

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

宁波超鑫铆钉制造有限公司

联系人：吴铁洲移动电话： 15906744333 电话：0574-63313978 Email:

登陆后可见

材料：铜、铝、铁、不锈钢；规格：齐全；表面处理：按照客户的要求

[询价]

慈溪市钉晟紧固件有限公司

联系人：励晨莹/励家豪点击这里给我发消息

469369214 移动电话： 15158363879/18258728198 电话：15158363879/18258728198 微信号：15158363879/18258728198 Email:

登陆后可见

材质：不锈钢，全铁，铝等；规格尺寸齐全；表面处理可根据客户需求，现货充足。

[询价]

上海承泰金属五金制造有限公司

联系人：诸葛鸿满

2880137050 点击这里给我发消息

2880137059 移动电话： 18916049888 电话：021-59742477/59740118 Email:

登陆后可见

材质：不锈钢、铝、碳钢；规格：齐全；表面处理：根据客户要求

[询价]

类似标准及供货信息

1	[国标] GB /T 12618.1 - 2006	开口型平圆头抽芯铆钉 10、11级（铝钉钢芯） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 10,11 供应商(7)
2	[国标] GB /T 12618.2 - 2006	开口型平圆头抽芯铆钉 30级）（钢钉钢芯） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 30 供应商(7)
3	[国标] GB /T 12618.3 - 2006	开口型平圆头抽芯铆钉 12级（铝钉铝芯） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 12 供应商(7)
4	[国标] GB /T 12618.4 - 2006	开口型平圆头抽芯铆钉 51级（不锈钢） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 51 供应商(7)
5	[国标] GB /T 12618.5 - 2006	开口型平圆头抽芯铆钉 20、21、22级（铜钉，钢、青铜或不锈钢芯） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 20,21,22 供应商(7)
6	[国标] GB /T 12618.6 - 2006	开口型平圆头抽芯铆钉 40、41级（镍铜钉，不锈钢或钢芯） Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 40,41 供应商(7)
7	[国标] GB 12618 - 1990	开口型扁圆头抽芯铆钉 Mushroom Head Break Mandrel Blind Rivets 供应商(7)
8	[美标] IFI 114 - 2003	开口型圆头抽芯铆钉 Regular and large dome head style break mandrel blind rivets 供应商(2)
9	[美标] IFI 117 - 2003	轻型开口圆头抽芯铆钉 Regular And Large Dome Head Pull Through Mandrel Blind Rivets 供应商(1)
10	[美标] IFI 505 - 1999	米制开口型扁圆头抽芯铆钉 Metric Mushroom Head Break Mandrel Blind Rivets 供应商(1)
11	[美标] IFI 520 - 1999	米制开口圆头抽芯铆钉 Metric Regular And Large Protruding Head Pull Through Mandrel Blind Rivets 供应商(1)
12	[美标] IFI 551 - 1999	米制结构型开口平圆头抽芯铆钉 Metric Regular And Large Protruding Head Style Structral Flush Break Pull Mandrel Self-Plugging Blind Rivets 供应商(1)
13	[美标] IFI 114 - 1986	开口型圆头抽芯铆钉 Table 1 Regular And Large Protruding Head Style Break Mandrel Blind Rivets 供应商(2)
14	[德标] DIN 7337 (A) - 1991	开口型平圆头抽芯铆钉 Break manderl blind rivets ，flat head 供应商(3)
15	[国际] ISO 15977 - 2002	铝帽铁芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St 供应商(3)
16	[国际] ISO 15979 - 2002	铁帽铁芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St 供应商(4)
17	[国际] ISO 15981 - 2002	铝帽铝芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA 供应商(4)
18	[国际] ISO 15983 - 2002	全不锈钢开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2 供应商(4)
19	[国际] ISO 16582 - 2002	开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt 供应商(3)
20	[国际] ISO 16582	开口型圆头抽芯铆钉 Open end blind rivets with break pull mandrel and round head - Cu/St Or Cu/Br Or Cu/SSt 供应商(3)
21	[国际] ISO 16584 - 2002	开口型盘头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt
22	[汽标代号] Q 440	开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets 供应商(3)
23	[汽标代号] Q 440B	开口型平圆头抽芯铆钉 10、11级 Open End Blind Rivets With Break Pull Mandrel And Protruding Head―Property Class 10,11 供应商(3)
24	[汽标代号] Q 440B (T19)	开口型平圆头抽芯铆钉 30级 Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 30 供应商(3)
25	[汽标代号] Q 449	塑料件用开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head For Plastic Parts
26	[美标] ASME/ANSI B 18.30.1M - 2000 (R2005)	米制开口型圆头抽芯铆钉 [Table 1] Regular and Large Protruding Head Style Break Mandrel Blind Rivets (Metric Series) [Table 1]
27	[意大利] UNI 9200 (A) - 1994	开口型扁圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head 供应商(1)
28	[法国] NF E 25-716 - 2003	铁帽铁芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St 供应商(1)
29	[法国] NF E 25-720 - 2003	全不锈钢开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2 供应商(1)
30	[法国] NF E 25-714 - 2003	铝帽铁芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
31	[法国] NF E 25-718 - 2003	铝帽铝芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA
32	[法国] NF E 25-722 - 2003	铜帽铁芯开口圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt
33	[法国] NF E 25-724 - 2003	NiCu帽铁芯开口型盘头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt
34	[企标] YJT 8010	圆头拉花型铆钉（替代YJT 1047） Round head Peel type rivets（YJT 1047）供应商(3)
35	[企标] YJT 8026	哈克洛克双锁抽芯铆钉供应商(1)
36	[企标] YJT 8027	哈克宝马抽芯铆钉供应商(1)
37	[企标] YJT 8028	圆头沟槽型抽芯铆钉供应商(1)
38	[企标] YJT 8035	防水型灯笼铆钉 Lantern rivets，Waterproof 供应商(1)
39	[企标] YJT 8037	开口型平圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head 供应商(1)
40	[企标] YJT 8039	开口型大帽沿抽芯铆钉 Open end blind rivets with break pull mandrel and mushroom head 供应商(1)
41	[德标] DIN EN ISO 15979 - 2003	铁帽铁芯开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St 供应商(3)
42	[德标] DIN EN ISO 15981 - 2003	铝帽铝芯开口型圆头抽芯铆钉-AIA/AIA Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA 供应商(3)
43	[德标] DIN EN ISO 15983 - 2003	全不锈钢开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2 供应商(3)
44	[德标] DIN EN ISO 16582 - 2003	开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt 供应商(3)
45	[德标] DIN EN ISO 16584 - 2003	开口型盘头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt 供应商(3)
46	[汽标] QC /T 892 - 2011	塑料用开口型圆头抽芯铆钉 Open End Blind Rivets With Break Pull Mandrel And Protruding Head For Plastic Parts
47	[航空] HB 8003 - 2022	铝合金平圆头抽芯铆钉 Pan head break mandrel blind rivets, in aluminum alloy material

开口型圆头抽芯铆钉—铝帽铁芯 DIN EN ISO 15977 - 2011

采用标准

相关材料标准或牌号

技术条件和引用标准

引用参考