会员中心 | English | 繁體中文

A级小型平垫圈用于螺钉和垫圈组合件(S型) ISO 10673 (S) - 2009

选择规格尺寸点击↓

M2.5

M3.5

M10

M12

ISO 10673 (S) - 2009 A级小型平垫圈用于螺钉和垫圈组合件(S型)

尺寸单位: mm

国际ISO 10673 (S) - 2009 ISO10673 10673ISO A级小型平垫圈用于螺钉和垫圈组合件(S型)

扫一扫分享

单重计算公差

螺纹规格
d

M2.5

M3.5

M10

M12

d	最小值=公称
	最大值
d_c	最大值=公称
	最小值
h	公称
	最大值
	最小值

1.75	2.25	2.75	3.2	3.6	4.55	5.5	7.4	9.3	11
1.85	2.35	2.85	3.32	3.72	4.67	5.62	7.55	9.52	11.27
4.5	5	6	7	8	9	11	15	18	20
4.2	4.7	5.7	6.64	7.64	8.64	10.57	14.57	17.57	19.48
0.6	0.6	0.6	0.8	0.8	1	1.6	1.6	2	2
0.65	0.65	0.65	0.85	0.85	1.06	1.68	1.68	2.09	2.09
0.55	0.55	0.55	0.75	0.75	0.94	1.52	1.52	1.91	1.91

替代列表

ISO 10673(S) - 1998 ISO 10673(S) - 2009

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 97.4(S)	ISO 10673(S)	DIN EN ISO 10673(S)

以上有部分标准可能为近似等效，如有异议以标准原件为准

工艺相关

ISO 3269

紧固件验收检查

ISO 4759-3

紧固件公差 3: 螺栓、螺钉和螺母用平垫圈, 产品等级为A, C和F级

技术条件和引用标准

材料 ^②
与螺钉热处理有关的组件
机械性能	硬度等级
	硬度范围^④
公差	产品等级
	标准
表面处理
表面缺陷
验收及包装
备注

钢		Heat treatable steel as agreed between screw manufacturer andwasher suppller
Washer to be assembled after heat treatment of the screw (see method 2 in ISO 10644)		Washer to be assembled before heat treatment of the screw (see method 1 in ISO 10644)
200 HV^①	300 HV^①	200 HV^③	300 HV^③
200 HV～300 HV	300 HV～370 HV	200 HV～300 HV	300 HV～370 HV
A^⑤
ISO 4759-3
Plain, i.e. washers to be supplied in natural finish or as agreed between screw manufacturer and washer supplier. All tolerances shall apply prior to the application of a plating or coating.
Parts shall be uniform in quality and free of irregularities or detrimental defects. No protruding burrs shall appear on the washer .
ISO 3269
① Heat treated ( HT ) or work hardened ( WH ) to be defined in the designation . In case of no specication, the washer manufacturer can choose freely. ② Other materials as agreed between screw manufacturer and washer supplier. ③ Hardness class after the heat treatment of the screw and washer assembly in accordance with ISO 10644. ④ Hardness testing in accordance with ISO 6507-1. Test force: HV 2 for nominal thicknesses h ≤ 0.6 mm; HV 10 for nominal thicknesses 0.6 mm < h ≤ 1.2 mm; HV 30 for nominal thicknesses h > 1.2 mm. ⑤ Product grade A does not apply to the tolerances of the clearance hole, d , and the thickness, h.

引用参考

GB /T 1172

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3103.3 - 2020

紧固件公差平垫圈

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

上海上垫垫圈有限公司

联系人：孙经理

2392096921 移动电话： 13788982145，13701728162 电话：021-57317386 微信号：13788982145 Email:

登陆后可见

材料：碳钢、不锈钢；规格齐全；表面处理：按客户要求

[询价]

平湖市康成达标准件有限公司

联系人：何雪康

492559158

2283364343 移动电话： 13806722843（微信同号）电话：0573-85636788/85636789 Email:

登陆后可见

材质：碳钢、中碳钢、不锈钢、铜、铝；规格：φ2-φ12；表面处理：镀锌、发黑、磷化、达克罗、热镀锌，机械镀锌

[询价]

类似标准及供货信息

1	[国标] GB /T 97.4 (S) - 2002	S型（小）平垫圈用于螺钉组合件 Plain Washers（Small） For Combination Screw 供应商(1)
2	[国标] GB /T 97.4 (N) - 2002	N型（标准）平垫圈用于螺钉组合件 Plain Washers（Normal） For Combination Screw 供应商(7)
3	[国标] GB /T 97.5 (N) - 2002	N型平垫圈用于自攻螺钉和垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Type N 供应商(2)
4	[国标] GB /T 97.5 (L) - 2002	L型平垫圈用于自攻螺钉和垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Type L 供应商(1)
5	[国标] GB 9074.24 - 1988	组合件用平垫圈 Plain Washers For Assembly 供应商(7)
6	[国标] GB 9074.25 - 1988	组合件用大垫圈 Blg Plain Washer For Assembly 供应商(2)
7	[国标] GB 9074.29 - 1988	自攻螺钉组合件用平垫圈 Samll Washer For Tapping Screw Assembly 供应商(2)
8	[国标] GB 9074.30 - 1988	自攻螺钉组合件用大垫圈 Blg Washer For Tapping Screws Assembly 供应商(1)
9	[德标] DIN 6902 (B) - 1990	螺钉与垫圈组合件用平垫圈 B型 Plain washers for screw and washer assemblies—Type B 供应商(1)
10	[德标] DIN 6902 (A) - 1990	螺钉与垫圈组合件用平垫圈 A型 Plain washers for screw and washer assemblies—Type A 供应商(2)
11	[德标] DIN 6902 (C) - 1990	螺钉与垫圈组合件用平垫圈 C型 Plain washers for screw and washer assemblies—Type C 供应商(1)
12	[德标] DIN 6903 (B) - 1990	自攻钉与垫圈组合件用平垫圈 B型 Plain washers for tapping screw and washer assemblies—type B 供应商(1)
13	[德标] DIN 6903 (A) - 1990	自攻钉与垫圈组合件用平垫圈 A型 Plain washers for tapping screw and washer assemblies—type A 供应商(2)
14	[国际] ISO 10673 (L) - 2009	A级大型平垫圈用于螺钉和垫圈组合件(L型) Plain Washers For Screw And Washer Assemblies - Large Series - Product Grade A 供应商(2)
15	[国际] ISO 10673 (N) - 2009	A级标准型平垫圈用于螺钉和垫圈组合件(N型) Plain Washers For Screw And Washer Assemblies - Normal Series - Product Grade A 供应商(2)
16	[国际] ISO 10669 (N) - 1999	A级标准型组合用平垫用于自攻钉与垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Normal Series - Product Grade A 供应商(2)
17	[国际] ISO 10669 (L) - 1999	A级组合用大平垫用于自攻钉与垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Large Series - Product Grade A 供应商(2)
18	[国际] ISO 10673 (N) - 1998	平垫 Plain washers for screw and washer assemblies-Normal series-Product grade A 供应商(2)
19	[日标] JIS B 1258 (S) - 2012	平垫圈用于螺钉和垫圈组合件(S型) Plain Washers For Screw And Washer Assemblies - Type S 供应商(2)
20	[日标] JIS B 1258 (N) - 2012	平垫圈用于螺钉和垫圈组合件(N型) Plain Washers For Screw And Washer Assemblies - Type N 供应商(2)
21	[日标] JIS B 1258 (L) - 2012	平垫圈用于螺钉和垫圈组合件(L型) Plain Washers For Screw And Washer Assemblies - Type L 供应商(2)
22	[日标] JIS B 1258 - 2006	组合螺丝用大平垫 Large plain washers for screws assmebly 供应商(2)
23	[日标] JIS B 1258 - 2006	组合螺丝用平垫 Plain washers for screws assembly 供应商(2)
24	[日标] JIS B 1258 - 2006	组合螺丝用小平垫 Small plain washers for screws 供应商(2)
25	[汽标代号] Q 407	组合件用平垫 Plain washers for assembly 供应商(4)
26	[汽标代号] Q 407B (L)	L型（大）平垫圈用于螺钉组合件 Plain Washers（Large）for Combination Screw 供应商(4)
27	[汽标代号] Q 407B (N)	N型（标准）平垫圈用于螺钉组合件 Plain Washers（Normal） For Combination Screw 供应商(4)
28	[汽标代号] Q 421	自攻螺钉组合用平垫 Plain washer for tapping screw assembly 供应商(3)
29	[汽标代号] Q 421B (N)	N型平垫圈用于自攻螺钉和垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Type N 供应商(3)
30	[汽标代号] Q 422	自攻螺钉组合用大平垫 Large plain washers for self-tapping screws 供应商(3)
31	[汽标代号] Q 422B (L)	L型平垫圈用于自攻螺钉和垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Type L 供应商(3)
32	[法国] NF E 25-522 - 1999	大型组合垫圈用于自攻螺钉和垫圈组合件 Plain Washers For Tapping Screw And Washer Assemblies - Large Series - Product Grade A
33	[德标] DIN EN ISO 10673 (S) - 2009	螺钉与垫圈组合件用平垫圈 S型产品等级A级 Plain Washers For Screw And Washer Assemblies—Type S, Product Grade A 供应商(1)
34	[德标] DIN EN ISO 10673 (N) - 2009	螺钉与垫圈组合件用平垫圈 N型产品等级A级 Plain Washers For Screw And Washer Assemblies—Type N, Product Grade A 供应商(2)
35	[德标] DIN EN ISO 10673 (L) - 2009	螺钉与垫圈组合件用平垫圈 L型产品等级A级 Plain Washers For Screw And Washer Assemblies—Type L, Product Grade A 供应商(1)
36	[德标] DIN EN ISO 10669 (N) - 1999	自攻钉与垫圈组合件用平垫圈标准型 Plain Washers For Tapping Screw And Washer Assemblies—Normal Series 供应商(2)
37	[德标] DIN EN ISO 10669 (L) - 1999	自攻钉与垫圈组合件用平垫圈大系列 Plain Washers For Tapping Screw And Washer Assemblies—Large Series 供应商(1)

A级小型平垫圈 用于螺钉和垫圈组合件(S型) ISO 10673 (S) - 2009

工艺相关

技术条件和引用标准

引用参考

A级小型平垫圈用于螺钉和垫圈组合件(S型) ISO 10673 (S) - 2009