液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 耳轴支架 ISO 8132 (AT4) - 2022
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,适用于缸径25 mm~250 mm 的16 MPa (160bar) 液压缸和缸径50 mm~200 mm 的25 MPa (250bar) 液压缸。 ②,CR-在耳轴支架上用于螺栓的孔 FK-安装面至销轴轴线的距离 FN-耳轴支架的总高 HB-支架安装孔直径 NH-耳轴支架的厚度 TH-安装螺栓间距 UL-外形尺寸 CO-键槽宽度 KC-键槽深度 FS-安装孔的距离 |
采用标准
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB 1160.2 (A) - 1989 |
旋入式圆形油标 A型 Oil Level Indicators - Screwing Round Type - Type A 供应商(1) |
| 2 |
|
[国标] GB /T 39949.1 (AP2) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用双耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod clevis, female thread |
| 3 |
|
[国标] GB /T 39949.1 (AF3) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用法兰 圆形 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod flange, circular |
| 4 |
|
[国标] GB /T 39949.1 (AB4) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 双耳环支架 通孔 对称型 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Clevis bracket straight |
| 5 |
|
[国标] GB /T 39949.1 (AB3) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 双耳环支架 通孔 斜型 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Clevis bracket, in angle |
| 6 |
|
[国标] GB /T 39949.1 (AT4) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 耳轴支架 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Trunnion bracket |
| 7 |
|
[国标] GB /T 39949.1 (AP6) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用带关节轴承的单耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod eye spherical, female thread |
| 8 |
|
[国标] GB /T 39949.1 (AP4) - 2021 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用单耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod eye plain, female thread |
| 9 |
|
[国标] GB /T 2157 - 1991 |
机床夹具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut |
| 10 |
|
[国标] GB /T 2160 - 1991 |
机床夹具零件及部件 压紧螺钉 The Parts And Units Of Jigs And Fixtures-holddown Screw |
| 11 |
|
[国标] GB /T 2171 - 1991 |
机床夹具零件及部件 光面压块 The Parts and Units of Jigs and Fixtures - Smooth Face Clamp Plate |
| 12 |
|
[国标] GB /T 2196 (A/C) - 1991 |
机床夹具零件及部件 - 钩形压板 A型和C型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type A and C |
| 13 |
|
[国标] GB /T 2196 (B) - 1991 |
机床夹具零件及部件 - 钩形压板 B型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type B |
| 14 |
|
[国标] GB /T 2197 - 1991 |
机床夹具零件及部件 钩形压板（组合） The Parts and Units of Jigs and Fixtures Hook Clamp Plate (Combinatlon) |
| 15 |
|
[国标] GB /T 2198 - 1991 |
机床夹具零件及部件 - 立式钩型压板（组合） The parts and units of jigs and fixtures - Vertical hook clamp plate(Combination) |
| 16 |
|
[国标] GB /T 2199 - 1991 |
机床夹具零件及部件 - 端面钩形压板（组合） The parts and units of jigs and fixtures - End face hook plate(Combination) |
| 17 |
|
[国标] GB /T 2200 - 1991 |
机床夹具零件及部件 - 侧面钩形压板（组合） The parts and units of jigs and fixtures - Side face hook clamp plate(Combination) |
| 18 |
|
[国标] GB /T 2201 - 1991 |
机床夹具零件及部件 定位衬套 The parts and units of jigs and fixtures locating bush |
| 19 |
|
[国标] GB /T 2203 - 1991 |
机床夹具零件及部件 固定式定位销 The parts and units of jigs and fixtures ( Fixed locating pin) |
| 20 |
|
[国标] GB /T 2205 - 1991 |
机床夹具零件及部件 - 定位插销 The Parts and Units of Jigs and Fixtures - Aligning Pin |
| 21 |
|
[国标] GB 2206 - 1991 |
机床夹具零件及部件 - 定位键 The parts and units of jigs fixtures - Locating key |
| 22 |
|
[国标] GB /T 2220 - 1991 |
机床夹具零件及部件 - 活动手柄 The Parts and Units of Jigs and Fixtures - Flexible Handle |
| 23 |
|
[国标] GB /T 2225 - 1991 |
机床夹具零件及部件 - 起重螺栓 The Parts and Units of Jigs and Fixtures - Lifting Bolt |
| 24 |
|
[国标] GB /T 2230 - 1991 |
机床夹具零件及部件 - 调节支承 The parts and units of jigs and fixtures Adjustable supporters |
| 25 |
|
[国标] GB /T 2234 - 1991 |
机床夹具零件及部件 - 低支脚 The parts and units of jigs and fixtures - Short legs |
| 26 |
|
[国标] GB /T 2256 - 1991 |
机床夹具零件及部件 塑料夹具用六角螺钉 The Parts And Units Of Jigs And Fixtures.hex Screw For Plastic Fixture |
| 27 |
|
[国标] GB /T 2257 - 1991 |
机床夹具零件及部件 塑料夹具用内六角螺钉 The Parts And Units Of Jigs And Fixtures.inner Hex Screw For Plastic Fixtures |
| 28 |
|
[国标] GB 1160.2 (B) - 1989 |
旋入式圆形油标 B型 Oil Level Indicators - Screwing Round Type - Type B |
| 29 |
|
[国标] GB 3473 - 1983 |
船用带舌插销 A型 Marine Toggle Pins - Type A |
| 30 |
|
[国标] GB 3473 - 1983 |
船用带舌插销 B型 Marine Toggle Pins - Type B |
| 31 |
|
[德标] DIN 71752 - 1994 |
叉型头, U型头 Fork heads 供应商(1) |
| 32 |
|
[德标] DIN 6314 - 2009 |
普通夹具 直边卡箍 夹紧块 Clamp, straight |
| 33 |
|
[德标] DIN 6315 (B) - 2009 |
叉形压板 夹钳 B型 Clamp, forked - Form B |
| 34 |
|
[德标] DIN 6315 (C) - 2009 |
叉形压板 夹钳 C型 Clamp, forked - Form C |
| 35 |
|
[德标] DIN 6306 (-2) - 2002 |
带移动卡式螺栓的定位销钉 旋杆 Tommy screws with moveable clamping bolt - bar |
| 36 |
|
[德标] DIN 6306 (-3) - 2002 |
带移动卡式螺栓的定位销钉 杆端帽 Tommy screws with moveable clamping bolt - end caps |
| 37 |
|
[德标] DIN 6320 - 2002 |
工装和夹具用螺纹体支脚 Feet With Threaded Shank For Jigs And Fixtures |
| 38 |
|
[德标] DIN 6321 - 2002 |
支撑和定位销 Support And Location Pins |
| 39 |
|
[德标] DIN 172 - 1992 |
导向衬套 钻套 A型和B型 Press Fit Jig Bushes, Headed - Form A and B |
| 40 |
|
[德标] DIN 1163 - 1973 |
铸型用销钉 Molding Pins |
| 41 |
|
[国际] ISO 8132 (AP2) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用双耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod clevis, female thread |
| 42 |
|
[国际] ISO 8132 (AF3) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用法兰 圆形 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod flange, circular |
| 43 |
|
[国际] ISO 8132 (AB4) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 双耳环支架 通孔 对称型 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Clevis bracket straight |
| 44 |
|
[国际] ISO 8132 (AB3) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 双耳环支架 通孔 斜型 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Clevis bracket, in angle |
| 45 |
|
[国际] ISO 8132 (AP6) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用带关节轴承的单耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod eye spherical, female thread |
| 46 |
|
[国际] ISO 8132 (AP4) - 2022 |
液压传动 16MPa(160bar)中型和25MPa(250 bar)单杆缸附件 - 活塞杆用单耳环 内螺纹 Hydraulic fluid power - accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Rod eye plain, female thread |
| 47 |
|
[汽标代号] Q 740 |
螺纹叉 Threaded Connecting Fork |
| 48 |
|
[汽标代号] Q 741 |
螺纹叉 - 细牙 Threaded Connecting Fork - Fine Thread |
| 49 |
|
[汽标代号] Q 742 |
焊接叉 Weldable Connecting Fork |
| 50 |
|
[机械行业] JB /T 7941.2 (A) - 1995 |
旋入式圆形油标 A型 Oil Level Indicators Screwing Round Type - Type A 供应商(1) |
| 51 |
|
[机械行业] JB /T 7934 - 1999 |
Z1型胀紧联结套 Locking Assemblies，Type Z1 |
| 52 |
|
[机械行业] JB /T 7934 - 1999 |
Z2型胀紧联结套 Locking Assemblies，Type Z2 |
| 53 |
|
[机械行业] JB /T 7934 - 1999 |
Z3型胀紧联结套 Locking Assemblies，Type Z3 |
| 54 |
|
[机械行业] JB /T 7934 - 1999 |
Z4型胀紧联结套 Locking Assemblies，Type Z4 |
| 55 |
|
[机械行业] JB /T 7934 - 1999 |
Z5型胀紧联结套 Locking Assemblies，Type Z5 |
| 56 |
|
[机械行业] JB /T 7934 - 1999 |
Z6型胀紧联结套 Locking Assemblies，Type Z6 |
| 57 |
|
[机械行业] JB /T 7934 - 1999 |
Z7A型胀紧联结套 Locking Assemblies，Type Z7A |
| 58 |
|
[机械行业] JB /T 7934 - 1999 |
Z7B型胀紧联结套 Locking Assemblies，Type Z7B |
| 59 |
|
[机械行业] JB /T 7934 - 1999 |
Z7C型胀紧联结套 Locking Assemblies，Type Z7C |
| 60 |
|
[机械行业] JB /T 7934 - 1999 |
Z8型胀紧联结套 Locking Assemblies，Type Z8 |
| 61 |
|
[机械行业] JB /T 7934 - 1999 |
Z9型胀紧联结套 Locking Assemblies，Type Z9 |
| 62 |
|
[机械行业] JB /T 7934 - 1999 |
Z10型胀紧联结套 Locking Assemblies，Type Z10 |
| 63 |
|
[机械行业] JB /T 7934 - 1999 |
Z11型胀紧联结套 Locking Assemblies，Type Z11 |
| 64 |
|
[机械行业] JB /T 7934 - 1999 |
Z12A型胀紧联结套 Locking Assemblies，Type Z12A |
| 65 |
|
[机械行业] JB /T 7934 - 1999 |
Z12B型胀紧联结套 Locking Assemblies，Type Z12B |
| 66 |
|
[机械行业] JB /T 7934 - 1999 |
Z12C型胀紧联结套 Locking Assemblies，Type Z12C |
| 67 |
|
[机械行业] JB /T 7934 - 1999 |
Z13型胀紧联结套 Locking Assemblies，Type Z13 |
| 68 |
|
[机械行业] JB /T 7934 - 1999 |
Z15型胀紧联结套 Locking Assemblies，Type Z15 |
| 69 |
|
[机械行业] JB /T 7934 - 1999 |
Z16型胀紧联结套 Locking Assemblies，Type Z16 |
| 70 |
|
[机械行业] JB /T 7934 - 1999 |
Z17A型胀紧联结套 Locking Assemblies，Type Z17A |
| 71 |
|
[机械行业] JB /T 7934 - 1999 |
Z17B型胀紧联结套 Locking Assemblies，Type Z17B |
| 72 |
|
[机械行业] JB /T 7934 - 1999 |
Z18型胀紧联结套 Locking Assemblies，Type Z18 |
| 73 |
|
[机械行业] JB /T 7934 - 1999 |
Z19A型胀紧联结套 Locking Assemblies，Type Z19A |
| 74 |
|
[机械行业] JB /T 7934 - 1999 |
Z19B型胀紧联结套 Locking Assemblies，Type Z19B |
| 75 |
|
[机械行业] JB /T 7934 - 1999 |
Z20型胀紧联结套 Locking Assemblies，Type Z20 |
| 76 |
|
[机械行业] JB /T 8004.8 (GB 2155) - 1999 |
机床夹具零件及部件 - 手柄螺母 The Parts And Units Of Jigs And Fixtures Handle Nut |
| 77 |
|
[机械行业] JB /T 8004.9 - 1999 |
机床夹具零件及部件 回转手柄螺母 The Parts and Units of Jigs and Fixtures Rotary Handle Nut |
| 78 |
|
[机械行业] JB /T 8006.1 - 1999 |
机床夹具零件及部件 - 压紧螺钉 The Parts and Units of Jigs and Fixtures - Holddown Screws |
| 79 |
|
[机械行业] JB /T 8007.3 - 1999 |
钩形螺栓 Hook Bolt |
| 80 |
|
[机械行业] JB /T 8012.3 - 1999 |
机床夹具零件及部件 - 立式钩型压板（组合） The Parts And Units Of Jigs And Fixtures - Vertical Hook Clamp Plate (Combination) |
| 81 |
|
[机械行业] JB /T 8012.4 - 1999 |
机床夹具零件及部件 - 端面钩形压板（组合） The Parts And Units Of Jigs And Fixtures - End Face Hook Clamp Plate (Combination) |
| 82 |
|
[机械行业] JB /T 8012.5 - 1999 |
机床夹具零件及部件 - 侧面钩形压板（组合） The Parts And Units Of Jigs And Fixtures - Sided Face Hook Clamp Plate (Combination) |
| 83 |
|
[机械行业] JB /T 8015 - 1999 |
机床夹具零件及部件 - 定位插销 The parts and units of jigs and fixtures - Aligning pin |
| 84 |
|
[机械行业] JB /T 8026.1 - 1999 |
六角头支承 Hex head supporting |
| 85 |
|
[机械行业] JB /T 8026.4 - 1999 |
机床夹具零件及部件 - 调节支承 The parts and units of jigs and fixtures Adjustable supporters |
| 86 |
|
[机械行业] JB /T 8026.7 - 1999 |
机床夹具零件及部件 - 自动调节支承 The parts and units of jigs and fixtures - Automatic adjuctable supportors |
| 87 |
|
[机械行业] JB /T 7941.2 (B) - 1995 |
旋入式圆形油标 B型 Oil Level Indicators Screwing Round Type - Type B |
| 88 |
|
[机械行业] JB 8004.10 - 1995 |
机床夹具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut |
| 89 |
|
[企标] YJT 13009 |
脚杯 Leveling mounts 供应商(2) |
| 90 |
|
[企标] YJT 13003 (GN 751) |
叉形接头 Fork Joints |
| 91 |
|
[企标] YJT 13011 |
万向调节脚 swivel leveling mounts |
| 92 |
|
[汽标] QC /T 336 - 1999 |
螺纹叉 Threaded Connecting Fork |
| 93 |
|
[汽标] QC /T 337 - 1999 |
焊接叉 Weldable Connecting Fork |
| 94 |
|
[美国军标] MS 35489 - 2012 |
护线圈 Grommets, synthetic and silicone rubber, hot-oil and coolant resistant |
| 95 |
|
[美标] ANSI /ABMA 8.2 - 1999 |
英制滚珠轴承和滚柱轴承配件 锁板 Table 5.3 Lockplate Dimensions Inch Design Series P-000 |
| 96 |
|
[航空] HB 8069 - 2002 |
带螺母的角材 Angle With Nuts |
| 97 |
|
[航空] HB 863 - 1990 |
螺纹顶杆 |
| 98 |
|
[航空] HB 2026 - 1989 |
表夹 |
| 99 |
|
[航空] HB 2059 (-2) - 1989 |
切向夹紧件 - 衬套 |
| 100 |
|
[航空] HB 2059 - 1989 |
切向夹紧件 |
© 易紧通 服务热线：4006-164580（免长途费）