十字槽六角头以及大六角头螺钉 [TABLE 2.2.9-3] ASME B 18.6.3 (H9C) - 2024
| 选择规格尺寸 点击↓ 8# 10# 12# 1/4 5/16 3/8 |
尺寸单位:
inch |
|
![ASME B 18.6.3 (H9C) - 2024 十字槽六角头以及大六角头螺钉 [TABLE 2.2.9-3]](https://img.164580.com/upload/48/pic_cadpara/1490_zh.png?ue=1734854351&local=cache&tp=canvas&pict=png)
![美标ASME B18.6.3 (H9C) - 2024 ASME18.6.3 1 十字槽六角头以及大六角头螺钉 [TABLE 2.2.9-3]](https://img.164580.com/upload/48/pic/2023/11/17/1700207519013568189.jpg)
![ASME B 18.6.3 (H9C) - 2024 十字槽六角头以及大六角头螺钉 [TABLE 2.2.9-3]](https://img.164580.com/upload/48/qrcode_standardurl/24958.png)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,若以小数规定公称直径，应略去小数点前面的零和第四位小数零。 ②,凹穴六角头允许所有边缘和棱角略有圆钝，但支承面圆周直径应不小于最小对边宽度的90%。 |
长度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
标称螺钉尺寸的长度公差 | |||
标称螺钉长度 | 螺纹规格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 29.2 - 2013 |
六角头带十字槽螺栓 Hexagon Bolts With Cross Recess On Head 供应商(4) |
| 2 |
|
[汽标代号] Q 174 |
十字槽六角头螺栓 Cross recessed hexagon head bolts 供应商(2) |
| 3 |
|
[汽标代号] Q 174B |
十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation 供应商(2) |
| 4 |
|
[美标] ASME B 18.6.3 (H9B-I) - 2024 |
十字槽凹穴六角头以及大六角头螺钉 [TABLE 2.2.9-2 I] Cross Recess Indented Regular and Large Hex Head Screws [TABLE 2.2.9-2 I] |
| 5 |
|
[美标] ASME B 18.6.3 (T30-I) - 2013 |
十字槽凹穴六角头以及大六角头螺钉 Cross Recess Indented Regular and Large Hex Head Screws |
| 6 |
|
[美标] ASME B 18.6.3 (T31-I) - 2013 |
十字槽六角头以及大六角头螺钉 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws |
© 易紧通 服务热线：4006-164580（免长途费）