会员中心 | English | 繁體中文

带安全闭锁装置的8级钢制锻造起重吊钩 ISO 7597 - 2013

选择规格尺寸点击↓

尺寸单位: mm

国际ISO 7597 - 2013 ISO7597 7597ISO 带安全闭锁装置的8级钢制锻造起重吊钩

扫一扫分享

公差

代号

工作极限载荷WLL	(吨)
D	最小值
D₀	最小值
D₁	最小值
F	最小值
H	最大值
L	最大值

0.25	0.5	0.8	1.12	1.5	2	2.5	3.15	3.75	5.3	6	8
11	15	19	22	26	30	34	38	42	49	52	60
8	11	14	17	20	23	26	29	32	37	40	46
8	11	14	16	18	21	24	27	30	35	37	43
6	8	10	12	14	16	18	20	23	26	28	32
12	17	21	25	29	34	38	43	48	55	59	68
8	11	14	17	20	23	26	29	32	37	40	46

代号

工作极限载荷WLL	(吨)
D	最小值
D₀	最小值
D₁	最小值
F	最小值
H	最大值
L	最大值

10	11.2	12.5	15	16	20	21.2	25	31.5	40	50	63
67	71	75	82	85	95	98	106	119	134	150	168
51	54	57	63	65	72	75	81	91	102	115	129
48	51	53	58	60	68	70	76	85	96	107	120
36	38	40	44	46	51	52	57	64	72	81	90
76	80	85	93	96	107	111	120	135	152	170	190
51	54	57	63	65	72	75	81	91	102	115	129

①,直接与钢丝绳吊索和编织吊索联接时，为满足联接和相关运动要求，尺寸F需要大于表中给出的最小值。
②,吊钩钩尖实际高度B不应小于开口尺寸D0。
③,吊钩开口尺寸D0不应超过钩腔实际直径D的95%。
④,吊钩安全闭锁装置应在实际开口尺寸D1装入最大直径的圆棒后仍能自然复位。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 25854 (Dee) - 2010	一般起重用 - D形卸扣 Forged shackles for general lifting purposes - Dee shackles 供应商(1)
2	[国标] GB 24814 - 2009	起重用短环链吊链等用4级普通精度链 Short link chain for lifting purposes - Grade 4, non-calibrated, for chain slings etc. 供应商(1)
3	[国标] GB /T 5974.1 - 2006	钢丝绳用普通套环 General purpose thimbles for use with steel wire ropes 供应商(1)
4	[国标] GB /T 8918 - 2006	重要用途钢丝绳 Steel wire ropes for important purposes 供应商(2)
5	[国标] GB /T 17116.3 - 2018	短型螺旋扣
6	[国标] GB /T 17116.3 - 2018	长型螺旋扣
7	[国标] GB /T 17116.3 - 2018	拉撑杆
8	[国标] GB /T 17116.3 - 2018	销座
9	[国标] GB /T 17116.3 - 2018	焊接倒U型吊板
10	[国标] GB /T 17116.3 - 2018	栓接倒U型吊板
11	[国标] GB 24813 - 2018	带安全闭锁装置的8级钢制锻造起重吊钩 Forged Steel Lifting Hooks With Latch, Grade 8
12	[国标] GB /T 10051.5 - 2010	起重吊钩 - 不带凸耳的直柄单钩 LM型和LY型 Lifting Hooks - Shank Hooks With Point - Type LM and LY
13	[国标] GB /T 10051.5 - 2010	起重吊钩 - 带凸耳的直柄单钩 LMD型和LYD型 Lifting Hooks - Shank Hooks With Point - Type LMD and LYD
14	[国标] GB /T 25854 (Bow) - 2010	一般起重用 - 弓形卸扣 Forged shackles for general lifting purposes - Bow Shackle
15	[国标] GB /T 5976 - 2006	钢丝绳夹 Wire Rope Grips
16	[国标] GB /T 547 (A) - 1994	D型卸锚扣 Anchor shackle-D type
17	[国标] GB /T 547 (B) - 1994	马蹄形锚卸扣 Anchor shackle-U-shaped
18	[国标] GB 10051.5 - 1988	起重吊钩 - 不带凸耳的直柄单钩 LM型和LY型 Lifting Hooks - Shank Hooks With Point - Type LM and LY
19	[国标] GB 10051.5 - 1988	起重吊钩 - 带凸耳的直柄单钩 LMD型和LYD型 Lifting Hooks - Shank Hooks With Point - Type LMD and LYD
20	[德标] DIN 1478 - 2005	钢管材或钢棒材制套筒螺母 Turnbuckles made from steel tubes or round steel bars 供应商(1)
21	[德标] DIN 1480 - 2005	模锻花兰，开放式 Forged Turnbuckles, (Open Type) 供应商(1)
22	[德标] DIN 5299 (D) - 1980	弹簧钩 D型 Snap Hook Round Wire and Forged - Form D 供应商(1)
23	[德标] DIN 5299 (E) - 1980	弹簧钩 E型 Snap Hook Round Wire and Forged - Form E 供应商(1)
24	[德标] DIN 1478 - 1975	钢管材或钢棒材制套筒螺母 Turnbuckles made from steel tube or round steel bar 供应商(1)
25	[德标] DIN 1480 - 1975	花篮螺栓 Turnbuckles 供应商(1)
26	[德标] DIN 82101 - 2005	优质非合金钢D形直卸扣 Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
27	[德标] DIN 82103 - 2005	不锈钢焊接直卸扣 (马蹄形卸扣) Components for liftig,towing,lashing—Shackle,bow-Stainless steels
28	[德标] DIN 763 - 1990	不按量规检验的长环节圆钢链 Tested, non-calibrated, long-link round steel chains
29	[德标] DIN 82103 - 1987	不锈钢焊接直卸扣 (马蹄形卸扣) Components for liftig,towing,lashing—Shackle,bow-Stainless steels
30	[德标] DIN 1142 - 1982	满足安全要求的钢丝绳卡头 Wire Rope Grips For Rope Terminations; To Meet Safety Requirements
31	[德标] DIN 5299 (A) - 1980	弹簧钩 A型 Snap Hook Half-round Wire - Form A
32	[德标] DIN 5299 (B) - 1980	弹簧钩 B型 Snap Hook Round Wire and Forged - Form B
33	[德标] DIN 5299 (C) - 1980	弹簧钩 C型 Snap Hook Round Wire and Forged - Form C
34	[德标] DIN 82101 - 1976	优质非合金钢D形直卸扣 Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
35	[德标] DIN 741 - 1972	电缆端部连接用钢丝绳夹 Wire rope clamps for cable end connections
36	[德标] DIN 82004 - 1972	A型花篮 Turnbuckles - Form A
37	[德标] DIN 82004 - 1972	B型花篮 Turnbuckles - Form B
38	[德标] DIN 82004 - 1972	C型花篮 Turnbuckles - Form C
39	[德标] DIN 82004 - 1972	D型花篮 Turnbuckles - Form D
40	[德标] DIN 82004 - 1972	E型花篮 Turnbuckles - Form E
41	[德标] DIN 82004 - 1972	花篮套筒 Clamp nut
42	[德标] DIN 48051-1 (SBM) - 1959	SBM 型钩型绝缘子支柱 Overhead lines Curved insulator supports - standard design -SBM
43	[德标] DIN 48051-1 - 1959	SBD 型钩型绝缘子支柱 Overhead lines Curved insulator supports - standard design -SBD
44	[国际] ISO 2415 (Dee) - 2022	一般起重用锻造卸扣 - D形卸扣 Forged shackles for general lifting purposes — Dee shackles
45	[国际] ISO 2415 - 2022	一般起重用 - 弓形卸扣 Forged shackles for general lifting purposes - Bow Shackle
46	[日标] JIS B 2809 (MS) - 2018	MS型U型螺栓 U Shape Bolts (Type MS) 供应商(1)
47	[日标] JIS B 2809 (MS) - 1977	MS型U型螺栓 U Shape Bolts (Type MS) 供应商(1)
48	[日标] JIS B 2809 (MR) - 2018	MR型U型螺栓 U Shape Bolts (Type MR)
49	[日标] JIS B 2809 (F) - 2018	F型U型螺栓 U Shape Bolts (Type F)
50	[日标] JIS A 5540 - 2008	建筑用索具 Table A.3 Turnbuckle Building, Thread Strap Bolt, Carbon steel and hot-dip zinc coated carbon steel
51	[日标] JIS A 5540 - 2008	建筑用索具花篮 Table A.4 Longer Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
52	[日标] JIS A 5540 - 2008	建筑用索具花篮 Table A.5 Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
53	[日标] JIS A 5540 - 2008	建筑用索具花篮 Table A.6 Longer Thread Strap Bolt, Carbon steel and hot-clip zinc coated carbon steel
54	[日标] JIS A 5540 - 2008	建筑用索具花篮不锈钢 Table A.8 Stainless Steel Thread Strap Bolt
55	[日标] JIS A 5540 - 2008	建筑用索具花篮不锈钢 Table A.9 Longer Stainless Steel Thread Strap Bolt
56	[日标] JIS A 5541 - 2008	建筑用花兰主体 - 碳钢制及热浸锌碳钢制 Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products
57	[日标] JIS A 5541 - 2008	建筑用花兰主体 - 不锈钢制 Body of Turnbuckle for Building - Stainless Steel Products
58	[日标] JIS A 5542 (1A) - 2003	建筑用花兰螺杆 - 单孔长平头螺杆 [碳钢, 热镀锌碳钢制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
59	[日标] JIS A 5542 (1B) - 2003	建筑用花兰螺杆 - 双孔长平头螺杆 [碳钢, 热镀锌碳钢制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
60	[日标] JIS A 5542 (2A) - 2003	建筑用花兰螺杆 - 吊环螺杆 [碳钢制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
61	[日标] JIS A 5542 (2B) - 2003	建筑用花兰螺杆 - 吊环螺杆 [碳钢制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
62	[日标] JIS A 5542 (3) - 2003	建筑用花兰螺杆 - 双头螺杆 [碳钢制] Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
63	[日标] JIS A 5542 (4) - 2003	建筑用花兰螺杆 - 不锈钢长平头螺杆 Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
64	[日标] JIS A 5542 (A1A) - 2003	建筑用轧钢制花兰螺杆 - 单孔长平头螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
65	[日标] JIS A 5542 (A1B) - 2003	建筑用轧钢制花兰螺杆 - 双孔长平头螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
66	[日标] JIS A 5542 (A2A) - 2003	建筑用轧钢制花兰螺杆 - 吊环螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
67	[日标] JIS A 5542 (A2B) - 2003	建筑用轧钢制花兰螺杆 - 吊环螺杆 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
68	[日标] JIS B 2801 - 1996	直形卸扣 SA、SB和SC型 Straight Shackle Body - Form SA, SB and SC
69	[日标] JIS B 2801 - 1996	卸扣 BD型 Shackle body - Form BD
70	[日标] JIS B 2801 - 1996	卸扣 SD型 Shackle body - Form SD
71	[日标] JIS B 2801 - 1996	卸扣 BA、BB和BC型 Bow Shackle Body - Form BA, BB and BC
72	[日标] JIS B 2809 (MR) - 1977	MR型U型螺栓 U Shape Bolts (Type MR)
73	[日标] JIS B 2809 (FS) - 1977	FS型U型螺栓 Wire clip for wire strand, Type FS
74	[日标] JIS B 2809 (FR) - 1977	FR型U型螺栓 U Shape Bolts (Type FR)
75	[机械行业] JB /ZQ 4333 - 2006	螺旋扣 Turnbuckle
76	[机械行业] JB /T 8025 - 1999	起重螺栓 Lifting Bolt
77	[欧标] EN 13411-5 (A1) - 2003	U形螺栓钢丝绳夹具 - 钢丝绳绳夹（卡头） U-Bolt Wire Rope Grips 供应商(2)
78	[欧标] EN 13889 (Dee) - 2008	一般起重用卸扣锻钢 6级 — D形 Forged steel shackles for general lifting purposes - Dee shackles
79	[欧标] EN 13889 (Bow) - 2008	一般起重用锻钢卸扣 — 弓形 Forged steel shackles for general lifting purposes - Bow shackles
80	[欧标] EN 13411-5 (A2) - 2003	U形螺栓钢丝绳夹具 - 钢丝绳绳夹（卡头）- 夹座 U-Bolt Wire Rope Grips - Bridge
81	[欧标] EN 13411-5 (A4) - 2003	U形螺栓钢丝绳夹具 - 钢丝绳绳夹（卡头）- 带颈螺母 U-Bolt Wire Rope Grips - Collar nut
82	[欧标] EN 1677-3 - 2001 (+A1:2008)	环眼自锁钩，锻造，8级 Forged Steel Self-locking Hooks - Grade 8
83	[欧标] EN 1677-5 - 2001 (+A1:2008)	环眼吊钩，带安全闭锁装置，锻钢，4级 Forged Steel Lifting Hooks with Latch, Grade 4
84	[欧标] EN 1677-2 - 2000 (+A1:2008)	环眼吊钩，带安全闭锁装置，锻钢，8级 Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
85	[化工] HG /T 21629 (A14) - 2021	U形吊耳
86	[化工] HG /T 21629 (A15) - 2021	花篮螺母
87	[化工] HG /T 21629 (A16) - 2021	U形螺母
88	[化工] HG /T 21629 (A30) - 2021	单孔U形吊耳
89	[化工] HG /T 21629 (A31) - 2021	单孔长吊板
90	[企标] YJT 17002	D形卸扣 G210 Shackle G210 供应商(1)
91	[企标] YJT 17018	国标B型卡头 National standard B wire rope clips 供应商(1)
92	[企标] YJT 17024 (DIN 1480)	DIN 1480 花兰 DIN 1480 Turnbuckles 供应商(1)
93	[企标] YJT 17028	G80 焊接型吊环/吊点 G80 Weld-on Pivot Link (N6-G100) 供应商(1)
94	[企标] YJT 17031	快速连接环 Connect Ring 供应商(1)
95	[企标] YJT 13010	固定锁牌 (船栓座) Fixed lock plate
96	[企标] YJT 1601	卡缆
97	[企标] YJT 17001 (Fist Grip)	钢丝绳卡头 G-429 Wire Rope Clips G-429
98	[企标] YJT 17003	马蹄形卸扣 G213 Shackle G213
99	[企标] YJT 17004	马蹄形卸扣 G2130 Shackle G2130
100	[企标] YJT 17005	D形卸扣 G215 Shackle G215