会员中心 | English | 繁體中文

抗剪型MJ螺纹高锁螺母 HB 6508 - 2005

选择规格尺寸点击↓

MJ4

MJ5

MJ6

MJ8

MJ10

尺寸单位: mm

航空HB 6508 - 2005 HB6508 6508HB 抗剪型MJ螺纹高锁螺母

扫一扫分享

公差

螺纹尺寸
d

MJ4

MJ5

MJ6

MJ8

MJ10

P	螺距
d₁	最小值=公称
d₁	最大值
d₂	+0.05, 0
e	最小值
D₁	最大值=公称
D₁	最小值
D₂	最大值=公称
D₂	最小值
D₃
D₄
H	±0.2
H1	0, -0.2
H2	+0.2, 0
h	+0.25, 0
h₁	±0.15
h₂	+0.25, 0
h₃
s	最大值=公称
s	最小值
R	参考

0.7	0.8	1	1	1.25
4.4	5.4	6.4	8.4	10.4
4.475	5.475	6.49	8.49	10.51
4.15	5.15	6.15	8.15	10.2
8.8	10	11.2	15.8	19.2
7.4	8.4	10	14	17
7.31	8.31	9.91	13.89	16.89
6.58	7.5	9	12	15
6.522	7.442	8.942	11.93	14.93
5.35	6.7	7.5	10	12.5
5.7	6.6	7.6	10.7	13
7	7.5	8.5	11	12.5
4.4	4.5	5	6	7
4.4	4.6	5.1	6.1	7.1
2.5	2.5	2.6	3	3.2
1.5	1.5	1.8	2.2	2.5
2.5	2.5	2.6	3	3
2.5	2.5	3	3.5	4
8	9	10	14	17
7.64	8.64	9.64	13.57	16.57
7.2	7.2	7.6	11	13.2

①,b. 收口：在保证锁紧性能的前提下，收口参数由工艺自行决定。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 3103.1 - 2002

紧固件公差（螺栓、螺柱、螺钉和螺母）

GB 3103.2 - 1982

紧固件公差 - 用于精密机械的螺栓、螺钉和螺母

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB 929 - 1988	单耳托板自锁螺母 Self-Locking Nuts, Singlelug, Anchor 供应商(2)
2	[国标] GB 931 - 1988	角形托板自锁螺母 Self-locking Nut, Angle, Anchor 供应商(1)
3	[国标] GB 1340 - 1988	成组游动托板自锁螺母支架 Supports for Self-Locking Nuts, anchor, Floating, Gang Channel
4	[国标] GB 927 - 1988	球面六角自锁螺母 Self-locking nuts, hexagon sphere
5	[国标] GB /T 932 - 1988	气密单耳托板自锁螺母 Self-locking, singlelug, anchor, sealing
6	[国标] GB 933 - 1988	气密双耳托板自锁螺母 Self-Locking Nuts, TwoLug, Angchor, Sealing
7	[国标] GB 937 - 1988	成组游动托板自锁螺母 Self-Locking Nuts, Angchor, Floating, Gang Channel
8	[国标] GB 938 - 1988	游动自锁螺母 Self-Locking Nuts, Floating
9	[国标] GB 939 - 1988	单耳托板自锁螺母保护罩 Boots For Self-Locking Nuts, Singlelug, Anchor
10	[国标] GB 940 - 1988	双耳托板自锁螺母保护罩 Boots for Self-Locking Nuts, Twolug, Anchor
11	[国标] GB 941 - 1988	角形托板自锁螺母保护罩 Boots for Self-Locking Nuts, Angle, Anchor
12	[国标] GB 1340 - 1977	成组游动托板自锁螺母支架 Supports for Self-Locking Nuts, anchor, Floating, Gang Channel
13	[德标] DIN 65242 - 2015	自锁托板螺母 Anchor Nuts With MJ-thread, Deep Counterbore, Self-locking, Floating, Two Lug, Corrosion-resisting Steel, Classification: 1100 MPa/315℃/425℃
14	[德标] DIN 987 - 1960	自锁钢芯板螺母 Plate nuts with steel core, self-locking
15	[德标] DIN EN 4123 - 2018	航空航天耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母 Aerospace series - Shank nuts , self-locking , in heat resisting nickel base alloy NI-PH2601 (Inconel 718 ) , silver. plated on thread - classification: 1 550 Mpa ( at ambient temperature ) / 600℃
16	[汽标] QC /T 1103 - 2019	12角头耐热锁紧螺母 12-Point Head Heat Resistant Nuts
17	[军标] GJB 134.1 - 1986	抗剪型高锁螺母 Hi-lock Nuts, shear
18	[美国军标] MS 51865 - 1970	六角盖形自锁螺母, 250°F Nut, Self-Locking, Cap-General Purpose, 250°F
19	[航天] QJ 3079.2 (A) - 2011	全金属自锁螺母-六角螺母
20	[航天] QJ 3078.6 - 1998	尼龙圈自锁螺母双耳托板螺母
21	[航天] QJ 3078.7 - 1998	尼龙圈自锁螺母单耳托板螺母
22	[航天] QJ 3078.8 - 1998	尼龙圈自锁螺母游动双耳托板螺母
23	[航天] QJ 3078.9 - 1998	尼龙圈自锁螺母游动方螺母
24	[航天] QJ 3079.2 - 1998	全金属自锁螺母-六角螺母
25	[航空] HB 8383 - 2013	GH4738 MJ螺纹十二角自锁螺母 Self-Locking Nuts, Double, Hexagon, MJ Thread, GH4738 供应商(2)
26	[航空] HB 5634 - 1987	六角压扁自锁螺母（最高工作温度650℃）供应商(1)
27	[航空] HB 5638 - 1987	六角压扁自锁螺母最高工作温度230℃ 供应商(1)
28	[航空] HB 1- 805 - 1976	单耳游动托板自锁螺母供应商(1)
29	[航空] HB 1- 808 - 1976	双耳游动托板自锁螺母供应商(1)
30	[航空] HB 8051 - 2002	MJ螺纹压装配自锁螺母 Nuts,insert,self-locking,with MJ thread
31	[航空] HB 8058 - 2002	MJ螺纹双耳托板自锁螺母 Self-locking, two lug anchor nuts, with MJ thread
32	[航空] HB 1 801 - 1983	六角自锁螺母
33	[航空] HB 962 - 2001	铸造铝合金 Aluminum alloy Casting
34	[浙江制造团体标准] T/ZZB 1842 - 2020	轨道交通用偏心式自锁防松螺母 Eccentric Selflocking Antiloosing For Rail Transit