会员中心 | English | 繁體中文

扩口式锥螺纹长接头体 GB /T 5627 - 2008

选择规格尺寸点击↓

尺寸单位: mm

国标GB /T5627 - 2008 GB5627 5627GB 扩口式锥螺纹长接头体

扫一扫分享

公差

管外径

d₀
d ^①	55°密封管螺纹
	60°圆锥管螺纹
D
L₀
L₂
L
L₁
s

3	3.5	4	6	8	10	10	14	15	17	19	22	24	27	30
R 1/8	R 1/8	R 1/8	R 1/4	R 1/4	R 3/8	R 3/8	R 1/2	R 1/2	R 3/4	R 3/4	R 1	R 1	R 1-1/4	R 1-1/4
NPT 1/8	NPT 1/8	NPT 1/8	NPT 1/4	NPT 1/4	NPT 3/8	NPT 3/8	NPT 1/2	NPT 1/2	NPT 3/4	NPT 3/4	NPT 1	NPT 1	NPT 1-1/4	NPT 1-1/4
M10×1	M10×1	M12×1.5	M14×1.5	M16×1.5	M18×1.5	M22×1.5	M24×1.5	M27×1.5	M30×2	M33×2	M36×2	M39×2	M42×2	M45×2
8.5	8.5	8.5	12.5	12.5	13	13	17	17	18	18	21.5	21.5	24	24
12.5	12.5	16	18	19	19	19.5	20	20.5	26	26	26	27.5	28.5	28.5
48.5	48.5	53	85	86	87	87.5	89	89.5	96	96	98	100.5	102.5	102.5
30	30	30	60	60	60	60	60	60	60	60	60	60	60	60
12	12	14	17	19	22	24	27	30	32	34	41	41	46	46

①,优先选用55°密封管螺纹。
②,e ≥ 1.12S。
③,技术要求按 GB/T 5653 的规定。

工艺相关

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 5626 - 2008	扩口式锥螺纹直通管接头 Flared Couplings - Male 供应商(1)
2	[国标] GB /T 5650 - 2008	扩口式管接头用空心螺栓 Flared Couplings - Inverted Flare Bolts 供应商(1)
3	[国标] GB /T 5650 - 1985	扩口式管接头空心螺栓 Flared type tube fittings--Inverted flare bolts 供应商(1)
4	[国标] GB /T 5625 (A) - 2008	扩口式端直通管接头-A型柱端 Flared Couplings - Straight Thread - Type A Stud ends
5	[国标] GB /T 5625 (F) - 2008	扩口式端直通管接头-F型柱端 Flared Couplings - Straight Thread - Type F Stud ends
6	[国标] GB /T 5627 - 2008	扩口式锥螺纹长管接头 Flared Couplings - Male Long
7	[国标] GB /T 5646 - 2008	扩口式管接头套管 Flared couplings ——Sleeve
8	[国际] ISO 13486-1 (A) - 1999	道路车辆液压制动系统，第1部分:双喇叭口金属管、螺纹孔、螺纹管接头和管座，A型螺纹接头 Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats，Type A male fitting
9	[国际] ISO 13486-1 (B) - 1999	道路车辆液压制动系统，第1部分:双喇叭口金属管、螺纹孔、螺纹管接头和管座，B型螺纹接头 Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats，Type B male fitting
10	[汽标代号] Q 651C	扩口式锥螺纹直通管接头体 Flared Couplings - Male - Body 供应商(1)
11	[汽标代号] Q 653B	扩口式弯通接头体 Flared Couplings - Union Elbow
12	[汽标代号] Q 654B	扩口式锥螺纹直角管接头体 Flared Couplings - Male Elbow - Body
13	[汽标代号] Q 655C	扩口式直通接头体 Flared Couplings - Union
14	[汽标代号] Q 656B	扩口式锥螺纹三通管接头体 Flared Couplings - Male Branch Tee - Body
15	[汽标代号] Q 657B	扩口式三通接头体 Flared Couplings - Union Tee
16	[汽标代号] Q 658B	扩口式四通接头体 Flared Couplings - Union Cross
17	[汽标代号] Q 660	扩口式管接头空心螺钉 Flared type tube fittings-inverted flare bolts
18	[汽标代号] Q 660B	扩口式管接头空心螺钉 Flared type tube fittings-inverted flare bolts
19	[汽标代号] Q 661B	扩口式压力表接头体 Flared Couplings - Connector for Pressure Gauge
20	[汽标] QC /T 403 - 2013	扩口式锥螺纹直通管接头体 Flared Couplings - Male - Body
21	[汽标] QC /T 404 - 2013	扩口式锥螺纹直角管接头体 Flared Couplings - Male Elbow - Body
22	[汽标] QC /T 405 - 2013	扩口式锥螺纹三通管接头体 Flared Couplings - Male Branch Tee - Body
23	[汽标] QC /T 960.1 (A) - 2013	道路车辆液压制动系统，第1部分:双喇叭口金属管、螺纹孔、螺纹管接头和管座 — A型螺纹接头 Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats，Type A male fitting
24	[汽标] QC /T 960.1 (B) - 2013	道路车辆液压制动系统，第1部分:双喇叭口金属管、螺纹孔、螺纹管接头和管座 — B型螺纹接头 Road Vehicles - Hydraulic Braking Systems - Part 1: Double-Flare Pipes, Tapped Holes, Male Fittings and Tube Seats，Type B male fitting
25	[航空] HB 4- 5 - 2002	扩口式A型直通管接头 Union, A type, flared tube 供应商(1)