D型导正销 HB 858 - 1990
|
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
| ①,材料：T10A （GB 1298）；热处理：52~56 HRC。 ②,技术条件按 HB 892-90。 |
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 13829.1 - 2004 |
槽销 带导杆及全长平行沟槽 Grooved Pin, Full Length Parallel Grooved With Pilot 供应商(2) |
| 2 |
|
[国标] GB /T 13829.2 - 2004 |
槽销 带倒角及全长平行沟槽 Grooved Pin, Full Length Parallel Grooved With Chamfer 供应商(3) |
| 3 |
|
[国标] GB /T 13829.3 - 2004 |
槽销 中部槽长为1/3全长 Grooved pins-One-third-length centre grooved 供应商(3) |
| 4 |
|
[国标] GB /T 13829.4 - 2004 |
槽销 中部槽长为1/2全长 Grooved Pins - Half-Length Centre Grooved 供应商(1) |
| 5 |
|
[国标] GB /T 13829.1 (A) - 1992 |
A型-带导杆及全长平行沟槽的槽销. Grooved pin, full length parallel grooved with pilot 供应商(2) |
| 6 |
|
[国标] GB /T 13829.1 (B) - 1992 |
B型-带倒角及全长平行沟槽槽销. Grooved Pins-Full-Length Parallel Grooved, With Chamferw 供应商(3) |
| 7 |
|
[国标] GB /T 13829.1 (C) - 1992 |
C型-中部带1/3全长平行沟槽的槽销 Grooved Pins-One-Third-Length Centre Grooved 供应商(3) |
| 8 |
|
[国标] GB /T 13829.1 (D) - 1992 |
D型中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-Length Centre Grooved 供应商(1) |
| 9 |
|
[德标] DIN 1469 - 2012 |
带颈配合槽销，沟槽长为全长1/2 Grooved Pins, Half Length Grooved With Gorge 供应商(1) |
| 10 |
|
[德标] DIN 1469 - 2011 |
带颈配合槽销 Grooved pins, Half length grooved with gorge 供应商(1) |
| 11 |
|
[德标] DIN 1469 - 1978 |
带颈配合槽销 Grooved Pins, Half Length Grooved With Gorge 供应商(1) |
| 12 |
|
[德标] DIN 1470 - 1978 |
带导杆及全长平行沟槽的槽销 Grooved pin, full length parallel grooved with pilot 供应商(1) |
| 13 |
|
[德标] DIN 1473 - 1978 |
带倒角及全长平行沟槽的槽销 Grooved Pins, Full Length Parallel Grooved With Chamfer 供应商(2) |
| 14 |
|
[德标] DIN 1475 - 1978 |
槽销，中部槽长为1/3全长 Grooved pins - 1/3 Length Centre Grooved 供应商(3) |
| 15 |
|
[国际] ISO 8739 - 1997 |
槽销—带导杆及全长平行沟槽 Grooved Pins-Full-Length Parallel Grooved, With Pilot 供应商(1) |
| 16 |
|
[国际] ISO 8740 - 1997 |
带倒角及全长平行沟槽槽销 Grooved Pins-Full-Length Parallel Grooved, With Chamfer 供应商(2) |
| 17 |
|
[国际] ISO 8742 - 1997 |
中部带1/3全长平行沟槽的槽销 Grooved Pins-One-Third-Length Centre Grooved 供应商(1) |
| 18 |
|
[国际] ISO 8743 - 1997 |
中部带1/2全长平行沟槽的槽销 Grooved Pins-Half-Length Centre Grooved |
| 19 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制半长槽销Table5 Grooved pins metric series with half-length grooved |
| 20 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制槽销Table3 Metric grooved pins, full-length parallel grooved-metric series |
| 21 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制中部带1/3全长沟槽的槽销 Metric grooved pins with one third length groove in the middle |
| 22 |
|
[美标] ASME/ANSI B 18.8.100M - 2000 (R2005) |
米制中部带1/2全长平行沟槽的槽销 Metric grooved pins—half-length centre grooved |
| 23 |
|
[欧标] EN 28740 - 1992 |
槽销 全长平行沟槽 带倒角 Full-Length Parallel Grooved, with Chamfer |
| 24 |
|
[欧标] EN 28743 - 1992 |
中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-Length Centre Grooved |
| 25 |
|
[法国] NF E 25-750 - 1997 |
中部带1/2全长平行沟槽的槽销 Grooved Pins. Half Length Centre Grooved |
| 26 |
|
[法国] NF E 25-761 - 1997 |
槽销 带导向的全长平行槽 Grooved Pins — Full-length Parallel Grooved, With Pilot |
| 27 |
|
[法国] NF E 25-763 - 1997 (R2002) |
中部带1/3全长平行沟槽的槽销 Grooved Pins. One-Third-Length Centre Grooved |
| 28 |
|
[法国] NF E 25-772 - 1997 (R2002) |
带倒角及全长平行沟槽的槽销 Grooved Pins. Full Length Paralled Grooved, With Chamfer |
| 29 |
|
[美标] SAE J 494 (C) - 2004 |
C型 槽销 Grooved Straight Pins - Type C |
| 30 |
|
[美标] SAE J 494 (E) - 2004 |
E型 槽销 Grooved Straight Pins - Type E |
| 31 |
|
[美标] SAE J 494 (F) - 2004 |
F型 槽销 Grooved Straight Pins - Type F |
| 32 |
|
[德标] DIN EN ISO 8739 - 1998 |
带导杆及全长平行沟槽的槽销 Grooved Pin, Full Length Parallel Grooved With Pilot 供应商(1) |
| 33 |
|
[德标] DIN EN ISO 8740 - 1998 |
带倒角及全长平行沟槽的槽销 Grooved Pins. Full-Length Parallel Grooved,With Chamfer 供应商(2) |
| 34 |
|
[德标] DIN EN ISO 8742 - 1998 |
槽销，中部带1/3全长平行沟槽 Grooved Pins - 1/3 Length Centre Grooved 供应商(3) |
| 35 |
|
[德标] DIN EN ISO 8743 - 1998 |
槽销 中部槽长为1/2全长 Grooved Pins -- Half-Length Centre Grooved |
| 36 |
|
[欧标] EN ISO 8743 - 1997 |
中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-Length Centre Grooved |
| 37 |
|
[美标] ASME B 18.8.2 - 2020 |
F型全长槽销 【Table 8 -1】 Grooved pins - Type F |
| 38 |
|
[美标] ASME B 18.8.2 - 2020 |
H型半长槽销 【Table 8 -1】 Grooved Pins - Type H |
| 39 |
|
[美标] ASME B 18.8.2 - 2020 |
G型槽销 【Table 8 -1】 Grooved Pins - Type G |
| 40 |
|
[美标] ASME B 18.8.2 - 2020 |
E型槽销 半长锥槽 【Table 8 -1】 Grooved Pins - Type E |
| 41 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
H型半长槽销 【Table 6】 Grooved Pins - Type H |
| 42 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
E型槽销 半长锥槽 【Table 6】 Grooved Pins - Type E |
| 43 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
F型全长槽销 【Table6】 Grooved pins - Type F |
| 44 |
|
[美标] ASME B 18.8.2 - 2000 (R2010) |
G型槽销 【Table 6】 Grooved Pins - Type G |
© 易紧通 服务热线：4006-164580（免长途费）