会员中心 | English | 繁體中文

扁圆头铆钉 QJ 3142 - 2001

选择规格尺寸点击↓

2.5

3.5

尺寸单位: mm

扫一扫分享

单重计算公差

千件重及价格计算千件重 : kg x 元/kg = 元/千件

默认密度 g/cm³

公称直径

2.5

3.5

d	最小值=公称
d	最大值
d₁	公称
	最小值
	最大值
h	公称
	最小值
	最大值
R	参考
r	最大值

2	2.5	3	3.5	4	5	6	8
2.1	2.6	3.1	3.6	4.1	5.1	6.15	8.15
4	5	6	7	8	10	12	16
3.76	4.76	5.76	6.71	7.71	9.71	11.65	15.65
4.24	5.24	6.24	7.29	8.29	10.29	12.35	16.35
0.8	0.9	1	1.2	1.3	1.7	2.2	3
0.7	0.8	0.9	1	1.1	1.5	2	2.8
0.9	1	1.1	1.4	1.5	1.9	2.4	3.2
2.9	4.3	5	5.7	6.8	8.7	9.3	12.2
0.1	0.1	0.1	0.1	0.3	0.3	0.3	0.3

千件钢制重≈kg

①,计算铝合金铆钉重量时，将表中重量数值乘以系数1.0；计算钢铆钉重量时，乘以系数2.85。

技术条件和引用标准

材料

-
铝合金 LY1，LY10

钢
ML10

热处理
表面处理

淬火及时效	回火
化学氧化	镀锌钝化

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB 1011 - 1986	大扁圆头铆钉 Truss Head Rivets 供应商(1)
2	[国标] GB 867 - 1986	半圆头铆钉 Round Head Rivets 供应商(2)
3	[国标] GB 871 - 1986	扁圆头铆钉 Flat Round Head Rivets 供应商(1)
4	[国标] GB 863.1 - 1986	半圆头铆钉 (粗制) Round Head Rivets - Black
5	[国标] GB 863.2 - 1986	小半圆头铆钉 (粗制) Round Head Rivets with Small Head - Black
6	[德标] DIN 660 - 2012	圆头铆钉（直径1mm至8mm） Round Head Rivets With Nominal Diameters From 1 to 8 mm 供应商(1)
7	[德标] DIN 660 - 1993	圆头铆钉 Round head rivets with nominal diameters from 1 to 8 mm 供应商(1)
8	[德标] DIN 124 - 2011	钢制圆头铆钉（公称直径10mm至36mm） Steel Round Head Rivets (Nominal Diameters From 10 mm to 36 mm)
9	[德标] DIN 674 - 2011	圆头铆钉（直径1.4至6mm） Flat Round Head Rivets - Norminal Diameters 1.4 mm to 6 mm
10	[德标] DIN 124 - 1993	圆头铆钉（直径10至36mm） Round Head Rivets(Nominal Diameters From 10 mm to 36 mm)
11	[德标] DIN 674 - 1993	圆头铆钉 Mushroom head rivets
12	[日标] JIS B 1213 (T5) - 1995	冷成型铆钉—盘头铆钉 Cold headed rivets - Pan Head Rivets
13	[日标] JIS B 1213 (T1) - 1995	冷成型铆钉—圆头实心铆钉 Cold headed rivets - Round Head Solid Rivets
14	[日标] JIS B 1213 (T2) - 1995	冷成型铆钉—圆头实心铆钉（小尺寸） Cold headed rivets - Round Head Solid Rivets
15	[日标] JIS B 1214 (T1) - 1995	热成型铆钉—圆头实心铆钉 [Table 1] Hot headed rivets - Round Head Rivets [Table 1]
16	[日标] JIS B 1214 (T5) - 1995	热成型铆钉—锅炉用圆头实心铆钉 [Table 5] Hot headed rivets - Round Head Rivets for Boilers [Table 5]
17	[汽标代号] Q 450	半圆头铆钉 Round head rivets
18	[汽标代号] Q 453	扁圆头铆钉 Flat round head rivets
19	[美标] ASME/ANSI B 18.1.3M - 1983 (R1995)	米制圆头铆钉Table4 Metric round head rivets
20	[美标] ASME/ANSI B 18.1.3M - 1983 (R2006)	米制圆头铆钉 [Table 4] (ASTM A31, SAE J430) Metric Round Head Rivets [Table 4] (ASTM A31, SAE J430)
21	[欧标] EN 6081 - 2022	航空航天系列铆钉通用头精密公差 - 英制系列 Aerospace Series - Rivet, Universal Head, Close Tolerance - Inch Series
22	[英标] BS 4620 (T3) - 1970	米制冷锻扁圆头实心铆钉 [Table 3] Metric Cold Forged Universal Head Rivets
23	[英标] BS 4620 (T4) - 1970	米制热锻粗制扁圆头实心铆钉 [Table 4] Metric Hot Forged Universal Head Rivets
24	[英标] BS 4620 (T2) - 1970	米制热锻粗制圆头实心铆钉 [Table 2] Metric Hot Forged Snap Head Rivets
25	[英标] BS 4620 (T1) - 1970	米制冷锻圆头实心铆钉 [Table 1] Metric Cold Forged Snap Head Rivets
26	[英标] BS 275 (-3) - 1927	圆头铆钉（直径1/2至1¾英寸） Standard Rivet - Snap head (½ Inch to 1¾ inch diameter)
27	[俄标] GOST 10299 - 1980	圆头铆钉 B和C级 Button-head Rivets of Accuracy Classes B And C
28	[美标] SAE J 492 - 1968	盘头实心铆钉 Table 4 Pan Head Rivets
29	[美标] SAE J 492 - 1968	圆头实心铆钉 Table 3 Button Head Rivets
30	[美标] SAE J 492 - 1968	大扁头实心铆钉 Table 5 Flat Round Head Rivet
31	[美标] ANSI B 18.1.1 - 1972 (R2016)	圆头实心铆钉 [Table 3] (ASTM A31, SAE J430) Button Head Rivets [Table 3] (ASTM A31, SAE J430)
32	[美标] ANSI B 18.1.1 - 1972 (R2016)	盘头实心铆钉 [Table 4] (ASTM A31, SAE J430) Pan Head Rivets [Table 4] (ASTM A31, SAE J430)
33	[美标] ANSI B 18.1.1 - 1972 (R2016)	扁圆头实心铆钉 [Table 5] (ASTM A31, SAE J430) Truss Head Rivets [Table 5] (ASTM A31, SAE J430)
34	[美标] ANSI B 18.1.2 - 1972 (R2016)	圆头实心铆钉 [Table 1] (A31, A131, A152, A502) Button Head Rivets (Manufactured Shape) [Table 1] (A31, A131, A152, A502)
35	[美标] ANSI B 18.1.2 - 1972 (R2016)	高圆头实心铆钉 [Table 2] (A31, A131, A152, A502) High Button Head (Acorn) Rivets, (Manufactured Shape) [Table 2] (A31, A131, A152, A502)
36	[航天] QJ 3142 - 2001	半圆头铆钉 Round Head Rivets
37	[航空] HB 6229~6239 - 1989	半圆头铆钉 Round Head Rivets