螺栓或螺钉和锥形弹性垫圈组合件 GB /T 9074.32 - 2017
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ①,最短螺钉长度。 ②,除规定尺寸外，其余尺寸按相应产品标准规定。 如GB/T 70.1。 |
技术条件和引用标准
|
|
|||||||||||||||||||||||||
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 9074.1 - 2018 |
螺栓或螺钉和平垫圈组合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供应商(5) |
| 2 |
|
[国标] GB /T 9074.5 - 2004 |
十字槽小盘头螺钉和平垫圈组合件 Cross Recessed Small Pan Head Screw And Washer Assemblies With Plain Washers 供应商(2) |
| 3 |
|
[国标] GB /T 9074.1 - 2002 |
螺栓或螺钉和平垫圈组合件 Bolt Or Screw And Washer Assemblies With Plain Washers 供应商(5) |
| 4 |
|
[国标] GB /T 9074.1 - 1988 |
十字槽盘头螺钉和平垫圈组合 Cross recessed pan head screws and plain washers assemblies 供应商(5) |
| 5 |
|
[国标] GB 9074.2 - 1988 |
十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供应商(3) |
| 6 |
|
[国标] GB 9074.3 - 1988 |
十字槽盘头螺钉和弹簧垫圈组合件 Cross Recessed Pan Head Screws And Single coil Spring Lock Washers Assemblies 供应商(3) |
| 7 |
|
[国标] GB 9074.4 - 1988 |
十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross Recessed Pan Head Screws,Single Coil Spring Lock Washer And Plain Washers Assemblies 供应商(13) |
| 8 |
|
[国标] GB /T 9074.5 - 1988 |
十字槽小盘头螺钉和平垫组合 Cross recessed small pan head screw and plain washer assemblies 供应商(2) |
| 9 |
|
[国标] GB /T 9074.6 - 1988 |
十字槽小盘头螺钉和大平垫组合 Cross recessed small pan head screw and large plain washer assemblies 供应商(2) |
| 10 |
|
[国标] GB 9074.7 - 1988 |
十字槽小盘头螺钉和弹簧垫圈组合件 Cross Recessed Small Pan Head Screw And Single Coil Spring Lock Washer Assemblies 供应商(2) |
| 11 |
|
[国标] GB 9074.8 - 1988 |
十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件 Cross Recessed Small Pan Head Screw,Single Coil Spring Lock Washer And Plain Washer Assemblies 供应商(10) |
| 12 |
|
[国标] GB 9074.9 - 1988 |
十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross Recessed Countersunk Head Screw And Countersunk Serrated External Toothed Lock Washer Assemblies 供应商(1) |
| 13 |
|
[国标] GB /T 9074.1 (S11) |
内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供应商(1) |
| 14 |
|
[国标] GB 9074.10 - 1988 |
十字槽半沉头螺钉和锥形锁紧垫圈组合 Cross Recessed Raised Countersunk Head Screw And Countersunk External Toothed Lock Washer Assemblies |
| 15 |
|
[国标] GB /T 9074.1 (S3) |
十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers |
| 16 |
|
[国标] GB /T 9074.1 (S4) |
内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers |
| 17 |
|
[国标] GB /T 9074.1 (S5) |
开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers |
| 18 |
|
[国标] GB /T 9074.1 (S6) |
开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers |
| 19 |
|
[国标] GB /T 9074.1 (S10) |
内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers |
| 20 |
|
[国标] GB /T 9074.1 (S12) |
六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers |
| 21 |
|
[国标] GB /T 9074.1 (S13) |
六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers |
| 22 |
|
[德标] DIN 6900-1 - 1990 |
十字盘头螺钉和平垫圈的组合螺钉 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供应商(1) |
| 23 |
|
[德标] DIN 6900-5 - 2004 |
锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer |
| 24 |
|
[德标] DIN 6304 (E) - 2002 |
带固定旋杆的卡式螺栓 E型 Tommy screws with fixed clamping bolt - Form E |
| 25 |
|
[德标] DIN 6304 (F) - 2002 |
带固定旋杆的卡式螺栓 F型 Tommy screws with fixed clamping bolt - Form F |
| 26 |
|
[德标] DIN 6306 (D) - 2002 |
带移动卡式螺栓的定位销钉 D型 Tommy screws with moveable clamping bolt - Type D |
| 27 |
|
[德标] DIN 6306 (E) - 2002 |
带移动卡式螺栓的定位销钉 E型 Tommy screws with moveable clamping bolt - Type E |
| 28 |
|
[德标] DIN 6900-2 - 1990 |
开槽螺钉和波形垫圈组合 Slotted screws and wave washers assemblies |
| 29 |
|
[德标] DIN 6900-3 - 1990 |
鞍形弹簧垫圈与螺钉组合件 Screw And Washer Assemblies With Coarse Thread With Curved Spring Lock Washer |
| 30 |
|
[德标] DIN 6900-4 - 1990 |
齿形弹簧垫圈与螺钉组合件 Screw And Washer Assemblies With Coarse Threaded Screws With Captive Serrated Lock Washer |
| 31 |
|
[德标] DIN 6900-5 - 1990 |
锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer |
| 32 |
|
[国际] ISO 2982-2 (Clip) - 2013 |
滚动轴承附件 - 锁紧卡组件 Rolling bearings - Accessories - Locking Clip Assemblies |
| 33 |
|
[国际] ISO 10644 - 2009 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw And Washer Sssemblies Made Of Steel With Plain Washers - Washer Hardness Classes 200 HV And 300 HV |
| 34 |
|
[国际] ISO 10644 - 1998 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 |
| 35 |
|
[日标] JIS B 1188 (T1A) - 1995 |
十字槽盘头螺钉、平垫和弹垫组合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供应商(2) |
| 36 |
|
[日标] JIS B 1554 (AL/ALL) - 2016 |
锁紧卡组件 Locking clip and applicable bolt |
| 37 |
|
[日标] JIS B 1130 - 2012 |
十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screw Assemblies With Washers |
| 38 |
|
[日标] JIS B 1130 - 2006 |
十字盘头螺钉和平垫圈的组合 Cross recessed pan screws and plain washers assemblies |
| 39 |
|
[日标] JIS B 1188 (T1B) - 1995 |
十字槽盘头螺钉和弹垫组合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles |
| 40 |
|
[日标] JIS B 1188 (T1C) - 1995 |
十字盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws And Plain Washer Assemblies |
| 41 |
|
[日标] JIS B 1188 (T1D) - 1995 |
十字盘头螺钉和外齿锁紧垫圈组合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies |
| 42 |
|
[汽标代号] Q 230B |
十字槽盘头螺钉与平垫组合 Cross recessed pan head tapping screws and plain washers assemblies 供应商(1) |
| 43 |
|
[汽标代号] Q 232 |
十字槽盘头螺钉与弹垫组合 Cross recessed pan head screws and spring washer assemblies 供应商(1) |
| 44 |
|
[汽标代号] Q 234 |
十字槽盘头螺钉与外锯齿锁紧垫圈组合 Cross recessed pan head screws and serrated lock washers external teeth assemblies 供应商(1) |
| 45 |
|
[汽标代号] Q 236B |
十字槽盘头螺钉与弹垫平垫组合 Cross recessed pan head screws combine with spring washer and plain washers 供应商(2) |
| 46 |
|
[汽标代号] Q 140B |
六角头螺栓与平垫圈组合件 Hex head and plain washer combination bolt |
| 47 |
|
[汽标代号] Q 240 |
十字槽沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross recessed countersunk head screws and serrated lock washers external teeth assemblies |
| 48 |
|
[汽标代号] Q 242 |
十字槽半沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross recessed countersunk raised head screws and serrated lock washers external teeth assemblies |
| 49 |
|
[机械行业] JB /T 7919.3 - 1999 |
锁紧卡组件 Locking Clip Assemblies |
| 50 |
![米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1]](http://img.164580.com/upload/48/pic/2022/01/14/1642132132016936492.jpg)
|
[美标] ASME/ANSI B 18.13.1M - 2011 |
米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter) 供应商(1) |
| 51 |
![米制开槽盘头螺钉和弹垫组合 SEMS[Table 1]](http://img.164580.com/upload/48/pic/2022/01/14/1642134711881669531.jpg)
|
[美标] ASME/ANSI B 18.13.1M - 2011 |
米制开槽盘头螺钉和弹垫组合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter) |
| 52 |
|
[美标] ASME/ANSI B 18.13 - 1996 |
内六角圆柱头螺钉和弹垫组合SEMS [Table 1] Socket head cap screw and spring washer assemblies-SEMS |
| 53 |
|
[美标] ASME/ANSI B 18.13 - 1996 |
开槽盘头螺钉和弹垫组合 SEMS[Table 2] Slotted pan head screw and spring washer assemblies-SEMS |
| 54 |
|
[原电子工业部] SJ 2834 - 1987 |
十字盘头螺钉和平垫圈的组合 |
| 55 |
|
[原电子工业部] SJ 2835 - 1987 |
十字槽盘头螺钉和弹垫组合 |
| 56 |
|
[原电子工业部] SJ 2836 - 1987 |
十字盘头螺钉和平、弹垫组合 |
| 57 |
|
[企标] YJT 4031 |
皇冠螺钉 供应商(1) |
| 58 |
|
[企标] YJT 4068 (GB9074.4T) |
内六角花形槽盘头平弹垫组合件 Hexalobular Socket Pan Head Screws, Single coil spring lock washer and Plain washer Assembles 供应商(1) |
| 59 |
|
[企标] YJT 4079 (GB 70.1 + GB 9074.13) |
内六角圆柱头螺钉和平垫、弹垫组合件 Hexagon socket head cap screws with single coil lock washer and plain washer assemblies 供应商(5) |
| 60 |
|
[企标] YJT 8021 |
十一槽子母铆钉 供应商(1) |
| 61 |
|
[西门子] SN 60736 |
内六角花形盘头螺钉组合件 供应商(1) |
| 62 |
|
[德标] DIN EN ISO 10644 - 2009 |
螺丝和钢制平垫圈组合件 垫圈硬度200HV和300HV Screw and Washer Assemblies made of Steel with Plain Washers – Washer hardness classes 200 HV and 300 HV 供应商(1) |
| 63 |
|
[德标] DIN EN ISO 10644 (S11) |
内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws And Washer Assemblies With Plain Washers 供应商(1) |
| 64 |
|
[德标] DIN EN ISO 10644 (S3) |
十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws And Washer Assemblies With Plain Washers |
| 65 |
|
[德标] DIN EN ISO 10644 (S4) |
内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws And Washer Assemblies With Plain Washers |
| 66 |
|
[德标] DIN EN ISO 10644 (S5) |
开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws And Washer Assemblies With Plain Washers |
| 67 |
|
[德标] DIN EN ISO 10644 (S6) |
开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws And Washer Assemblies With Plain Washers |
| 68 |
|
[德标] DIN EN ISO 10644 (S10) |
内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws And Washer Assemblies With Plain Washers |
| 69 |
|
[德标] DIN EN ISO 10644 (S12) |
六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts And Washer Assemblies With Plain Washers |
| 70 |
|
[德标] DIN EN ISO 10644 (S13) |
六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) And Washer Assemblies With Plain Washers |
| 71 |
|
[美标] ASME B 18.13 - 2018 (ERTA) |
开槽盘头螺钉和弹垫组合SEMS [Table 2] Slotted Pan Head Screw and Spring Washer Assemblies-SEMS |
| 72 |
|
[美标] ASME B 18.13 - 2017 |
内六角圆柱头螺钉和弹垫组合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS |
© 易紧通 服务热线：4006-164580（免长途费）