常闭式通气塞 - 阀片 Q 900B.3
|
尺寸单位:
mm |
|
| ①,材料：耐油橡胶；HG/T 2196。 |
采用标准
注：技术数据仅供参考，请以官方原件为准！
类似标准及供货信息
| 1 |
|
[国标] GB /T 3765 - 2008 |
F型螺纹油口柱端用O形圈 |
| 2 |
|
[国标] GB /T 13871.1 - 2007 |
密封元件为弹性体材料的旋转轴唇形密封圈 Rotary shaft lip type seals incorporating elastomeric sealing elements |
| 3 |
|
[国标] GB /T 19674.2 - 2005 |
A型柱端用填料密封圈 |
| 4 |
|
[国标] GB /T 19674.2 - 2005 |
E型柱端用填料密封圈 |
| 5 |
|
[国标] GB /T 3452.1 (G) - 2005 |
液压气动用O形橡胶密封圈 - G系列 Fluid power systems — O-rings — G seriers |
| 6 |
|
[国标] GB /T 3452.1 (A) - 2005 |
液压气动用O形橡胶密封圈 - A系列 Fluid power systems — O-rings — A seriers |
| 7 |
|
[国标] GB /T 9128 - 2003 |
钢制管法兰用金属环垫 Dimensions of metallic ring-joint gaskets for use with steel pipe flanges |
| 8 |
|
[国标] GB /T 10708.1 - 2000 |
活塞L1密封沟槽用Y形圈 Rubber Seals On One-way |
| 9 |
|
[国标] GB /T 10708.1 - 2000 |
活塞杆L1密封沟槽用Y形圈 |
| 10 |
|
[国标] GB /T 10708.1 - 2000 |
活塞L2密封沟槽用Y形圈 |
| 11 |
|
[国标] GB /T 10708.1 - 2000 |
活塞L2密封沟槽用蕾形圈 |
| 12 |
|
[国标] GB /T 10708.1 - 2000 |
活塞杆L2密封沟槽用Y形圈 |
| 13 |
|
[国标] GB /T 10708.1 - 2000 |
活塞杆L2密封沟槽用蕾形圈 |
| 14 |
|
[国标] GB /T 10708.1 - 2000 |
活塞L3密封沟槽用V形圈、压环和弹性圈 |
| 15 |
|
[国标] GB /T 10708.1 - 2000 |
活塞杆L3密封沟槽用V形圈、压环和支撑环 |
| 16 |
|
[国标] GB /T 10708.2 - 2000 |
双向密封圈 - 鼓形圈 |
| 17 |
|
[国标] GB /T 10708.2 - 2000 |
双向密封圈 - 山形圈 |
| 18 |
|
[国标] GB /T 10708.2 - 2000 |
塑料支承环 |
| 19 |
|
[国标] GB /T 10708.3 - 2000 |
A型防尘圈 wiper riitg ( scraper ) - Type A |
| 20 |
|
[国标] GB /T 10708.3 - 2000 |
B型防尘圈 |
| 21 |
|
[国标] GB /T 10708.3 - 2000 |
C型防尘圈 |
| 22 |
|
[国标] GB 3762 - 1983 |
卡套式管接头用尖角密封垫圈 Bite Type Tube Fittings - Tipping Washer |
| 23 |
|
[国标] GB 1235 - 1976 |
O形橡胶密封圈 O-rings, Inside Diameters, Cross-sections, Tolerances And Size Identification Code |
| 24 |
|
[德标] DIN 443 - 2017 |
密封推入帽 Sealing Push-In Caps 供应商(3) |
| 25 |
|
[德标] DIN 443 - 2011 |
密封推入帽 Sealing Push-In Caps 供应商(3) |
| 26 |
|
[德标] DIN 470 - 2011 |
密封垫圈 Sealing Washers 供应商(2) |
| 27 |
|
[德标] DIN 470 - 2008 |
密封垫圈 Sealing Washers 供应商(2) |
| 28 |
|
[德标] DIN 7603 (A) - 2001 |
密封垫圈 A型 Sealing Rings - Form A 供应商(8) |
| 29 |
|
[德标] DIN 988 (P/PS) - 1990 |
配合垫圈 Shim Rings 供应商(13) |
| 30 |
|
[德标] DIN 443 - 1970 |
密封推入帽 Sealing push-in caps 供应商(3) |
| 31 |
|
[德标] DIN 89347 - 2008 |
用于电缆和绝缘电线的密封垫圈 Washers For Glands For Electrical Cables And Insulated Wires |
| 32 |
|
[德标] DIN 7603 (C) - 2001 |
密封垫圈 C型 Sealing Rings - Form C |
| 33 |
|
[德标] DIN 7603 (D) - 2001 |
密封垫圈 D型 Sealing Rings - Form D |
| 34 |
|
[德标] DIN 86039 - 2000 |
船舶与海上技术 法兰联接用平垫圈 Ships and Marine Technology - Flat Gaskets for Flange Connections Extra Light Duty on 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10 |
| 35 |
|
[德标] DIN 3760 - 1996 |
旋转轴唇形密封圈 骨架油封 Rotary Shaft Lip Seals |
| 36 |
|
[德标] DIN 3869 - 1994 |
型材密封圈 Profil sealing rings |
| 37 |
|
[德标] DIN 3771 (-1) - 1993 |
O型密封圈 O-Rings |
| 38 |
|
[德标] DIN 988 (S/SS) - 1990 |
支承垫圈 Supporting Rings |
| 39 |
|
[德标] DIN 3770 - 1986 |
密封圈 Sealing rings (O-rings) with special a accuracy, made of elastomeric |
| 40 |
|
[国际] ISO 8434-1 (F) - 2018 |
卡套式管接头用O形圈 O-ring |
| 41 |
|
[国际] ISO 3601-1 - 2012 |
液压传动系统—— 一般工业用O型密封圈 Fluid Power Systems — O-Rings for General Industrial Applications |
| 42 |
|
[国际] ISO 3601-1 (A) - 2012 |
液压传动系统—— 航空用O型密封圈 Fluid Power Systems — O-Rings for Aerospace Applications |
| 43 |
|
[国际] ISO 11926-1 - 1995 |
通用和液压传动用接头 - 带ISO725螺纹和O形圈密封的油口和螺纹端头 - 第1部分:锪孔沟槽中装有O形密封圈的油口 Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring seal - Part1: Port with O-ring sea in truncated housing |
| 44 |
|
[日标] JIS B 2401-1 (F) - 2012 |
O型圈-用于工业应用 O-Rings For General Industrial Appilcations |
| 45 |
|
[汽标代号] Q 721 |
塞片 Expansion Plug 供应商(1) |
| 46 |
|
[汽标代号] Q 723 |
密封垫圈 Sealing rings 供应商(4) |
| 47 |
|
[汽标代号] Q 722 |
碗形塞片 Bowl type expansion plug |
| 48 |
|
[汽标代号] Q 728 |
密封塞 Sealing Plugs |
| 49 |
|
[汽标代号] Q 904.3 |
加长型常闭式通气塞 - 密封圈 |
| 50 |
|
[机械行业] JB /T 1308.6 - 2011 |
PN2500超高压阀门和管件 锥面垫、锥面盲垫 Gaskets and Conical Face Blind Gasket 供应商(1) |
| 51 |
|
[机械行业] JB /ZQ 4784 - 2006 |
密封垫圈 Sealing rings 供应商(2) |
| 52 |
|
[机械行业] JB /ZQ 4454 - 1997 |
螺塞用密封垫圈 Sealing washers for plugs 供应商(4) |
| 53 |
|
[机械行业] JB 1002 - 1977 |
密封垫圈 Sealing washers 供应商(4) |
| 54 |
|
[机械行业] JB 982 - 1977 |
组合密封垫圈 Combination Sealing Washer 供应商(1) |
| 55 |
|
[机械行业] JB /T 8547 - 2020 |
液力传动用合金铸铁密封环 Alloy cast iron rings for hydrodynamic drive |
| 56 |
|
[机械行业] JB /T 6659 - 2007 |
气动用O形橡胶密封圈 0-ring rubber seal applicable to pneumatic |
| 57 |
|
[机械行业] JB /T 6994 - 2007 |
VD形橡胶密封圈 VD Shape rubber seal ring |
| 58 |
|
[机械行业] JB /ZQ 4224 - 2006 |
O形橡胶密封圈 O-rings |
| 59 |
|
[化工] HG /T 20627 (MFM) - 2009 |
钢制管法兰用非金属垫片 - 凹面/凸面法兰用 MFM 型垫片 Class 300 (PN50) ~ Class 600 (PN110) Non-metallic Flat Gaskets For Use With Steel Pipe Flanges - Type MFM 供应商(1) |
| 60 |
|
[化工] HG /T 20631 (C/D) - 2009 |
钢制管法兰用缠绕式垫片 - 突面法兰用带对中环(C型)或带内环和对中环(D型)垫片 Spiral Wound Gaskets For Use With Steel Pipe Flanges - Type C, D 供应商(1) |
| 61 |
|
[化工] HG /T 20633 - 2009 |
钢制管法兰用金属环形垫（Class系列） Metallic ring joint gaskets for use with steel pipe flanges (Class designated) 供应商(1) |
| 62 |
|
[化工] HG /T 20606 (FF) - 2009 |
钢制管法兰用非金属平垫片 - FF型 Non-metallic flat gaskets for use with steel pipe flanges - Type FF |
| 63 |
|
[化工] HG /T 20606 (MFM) - 2009 |
钢制管法兰用非金属平垫片 - 凹面/凸面法兰用MFM型垫片 (PN10~PN63) Non-metallic flat gaskets for use with steel pipe flanges - Type MFM |
| 64 |
|
[化工] HG /T 20606 (RE/RE-E) - 2009 |
钢制管法兰用非金属平垫片 - RE、RE-E型 Non-metallic flat gaskets for use with steel pipe flanges - Type RE、RE-E |
| 65 |
|
[化工] HG /T 20606 (TG) - 2009 |
钢制管法兰用非金属平垫片 - 榫面/槽面法兰用TG型垫片 (PN10~PN63) Non-metallic flat gaskets for use with steel pipe flanges - Type TG |
| 66 |
|
[化工] HG /T 20610 (A,B) - 2009 |
钢制管法兰用缠绕式垫片(PN系列) A型，B型 Spiral Wound Gaskets For Use With Steel Pipe Flanges (PN desingated) -Type A, B |
| 67 |
|
[化工] HG /T 20610 (C,D) - 2009 |
钢制管法兰用缠绕式垫片(PN系列) C型，D型 Spiral Wound Gaskets For Use With Steel Pipe Flanges (PN desingated) -Type C, D |
| 68 |
|
[化工] HG /T 20611 (A) - 2009 |
钢制管法兰用具有覆盖层的齿形组合垫 - 基本型 Covered serrated metal gaskets for use with steel pipe flanges - A |
| 69 |
|
[化工] HG /T 20611 (B) - 2009 |
钢制管法兰用具有覆盖层的齿形组合垫 - 带整体对中环型 Covered serrated metal gaskets for use with steel pipe flanges - B |
| 70 |
|
[化工] HG /T 20611 (C) - 2009 |
钢制管法兰用具有覆盖层的齿形组合垫 - 带活动对中环型 Covered serrated metal gaskets for use with steel pipe flanges - C |
| 71 |
|
[化工] HG /T 20627 (FE) - 2009 |
钢制管法兰用非金属垫片 - 全平面法兰用 FF 型垫片 Class 150 (PN20) Non-metallic Flat Gaskets For Use With Steel Pipe Flanges - Type FF |
| 72 |
|
[化工] HG /T 20627 (RF/RF-E) - 2009 |
钢制管法兰用非金属垫片 - 突面法兰用 RF 和 RF-E 型垫片 Non-metallic Flat Gaskets For Use With Steel Pipe Flanges - Type RF、RF-E |
| 73 |
|
[化工] HG /T 20627 (TG) - 2009 |
钢制管法兰用非金属垫片 - 榫面/槽面法兰用 TG 型垫片 Class 300 (PN50) ~ Class 600 (PN110) Non-metallic Flat Gaskets For Use With Steel Pipe Flanges - Type TG |
| 74 |
|
[化工] HG /T 20631 (A/B) - 2009 |
钢制管法兰用缠绕式垫片 - 榫面/槽面和凹面/凸面法兰用基本型(A型)或带内环(B型)垫片 Spiral Wound Gaskets For Use With Steel Pipe Flanges - Type A, B |
| 75 |
|
[化工] HG /T 20631 - 2009 |
法兰(A系列)用带对中环(C型)或带内环和对中环(D型)缠绕垫片 |
| 76 |
|
[化工] HG /T 20631 - 2009 |
法兰(B系列)用带对中环(C型)或带内环和对中环(D型)缠绕垫片 |
| 77 |
|
[化工] HG 20612 (PN6.3Mpa(63bar)) - 1997 |
钢制管法兰用金属环垫 PN6.3Mpa(63bar) Metallic ring joint gaskets for use with steel pipe flanges，PN6.3Mpa(63bar) |
| 78 |
|
[化工] HG 20612 (PN10.0Mpa(100bar)) - 1997 |
钢制管法兰用金属环垫 PN10.0Mpa(100bar) Metallic ring joint gaskets for use with steel pipe flanges，PN10.0Mpa(100bar) |
| 79 |
|
[化工] HG 20612 (PN16.0Mpa(160bar)) - 1997 |
钢制管法兰用金属环垫 PN16.0Mpa(160bar) Metallic ring joint gaskets for use with steel pipe flanges，PN16.0Mpa(160bar) |
| 80 |
|
[化工] HG 20612 (PN25.0Mpa(250bar)) - 1997 |
钢制管法兰用金属环垫 PN25.0Mpa(250bar) Metallic ring joint gaskets for use with steel pipe flanges，PN25.0Mpa(250bar) |
| 81 |
|
[其它] NB/T 47024 - 2012 |
非金属软垫片 Nonmetallic gaskets |
| 82 |
|
[俄标] GOST 28919 - 1991 |
井口设备类型法兰连接 — 密封圈 — П型 Flange Connections of Wellhead Equipment - Gasket - П |
| 83 |
|
[俄标] GOST 28919 - 1991 |
井口设备类型法兰连接 — 密封圈 — БX型 Flange Connections of Wellhead Equipment - Gasket - БX |
| 84 |
|
[万禧] WS 9260 |
EPDM 连体垫圈 Sealing washers with EPDM 供应商(1) |
| 85 |
|
[美标] SAE AS 568 - 2020 |
O型圈 Aerospace Size Standard for O-Rings |
| 86 |
|
[美标] SAE J 1926-1 - 2016 |
一般用途和流体传动管接头.带ASME B1.1螺纹和O形圈密封的油口和螺纹端头.第1部分:锪孔沟槽中装有O形密封圈的油口 Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 1: Threaded Port with O-Ring Seal in Truncated Housing |
| 87 |
|
[德标] DIN ISO 3601-1 - 2013 |
液压传动系统—— 一般工业用O型密封圈 Fluid Power Systems — O-Rings For General Industrial Applications |
| 88 |
|
[德标] DIN ISO 3601-1 - 2013 |
液压传动系统—— 航空用O型密封圈 Fluid Power Systems — O-Rings For Aerospace Applications |
| 89 |
|
[汽标] QC /T 883 - 2011 |
密封塞 Sealing Plugs |
| 90 |
|
[汽标] QC /T 638 - 2000 |
密封垫圈 Sealing Rings |
| 91 |
|
[汽标] QC /T 387 - 1999 |
塞片 Expansion Plug |
| 92 |
|
[汽标] QC /T 388 - 1999 |
碗形塞片 Bowl Type Expansion Plug |
| 93 |
|
[汽标] QC /T 410 (-3) - 1999 |
常闭式通气塞 - 阀片 |
| 94 |
|
[汽标] QC /T 410 (C3) - 1999 |
C型常闭式通气塞 - 密封圈 |
| 95 |
|
[船舶] CB /T 4328 (04) - 2013 |
芳纶橡胶与增强聚四氟乙烯垫片（04） |
| 96 |
|
[美标] ASME B 16.20 - 2012 |
R型环垫Table3 Metallic Gaskets for Pipe Flanges ( Ring-Joint ) |
| 97 |
|
[美标] ASME B 16.20 - 2012 |
RX型环垫Table5 Type RX ring gasket |
| 98 |
|
[石化] SH /T 3403 - 2013 |
钢制管法兰用金属环垫 Metallic ring joint gaskets for steel pipe flanges in petrochemical industry |
| 99 |
|
[航空] HB 5955 - 1986 |
尼龙嵌件六角锁紧螺母尼龙圈 |
| 100 |
|
[瑞典工业标准] SIS SMS 1586 - 1965 |
O型圈 密封圈 O-Ring |
© 易紧通 服务热线：4006-164580（免长途费）