会员中心 | English | 繁體中文

非金属嵌件六角法兰面锁紧螺母 ISO 7043 - 1983

选择规格尺寸点击↓

M10

M12

(M14)

M16

M20

括号内尺寸为非优选

尺寸单位: mm

国际ISO 7043 - 1983 ISO7043 7043ISO 非金属嵌件六角法兰面锁紧螺母

扫一扫分享

公差公制螺纹极限尺寸米/英制螺纹对照

螺纹尺寸
d

M10

M12

(M14)

M16

M20

P	螺距
c	最小值
d_a	最大值
d_a	最小值
d_c	最大值
d_w	最小值
e	最小值
h	最大值
m	最小值
m_w	最小值
s	最大值
s	最小值
r	最大值

0.8	1	1.25	1.5	1.75	2	2	2.5
1	1.1	1.2	1.5	1.8	2.1	2.4	3
5.75	6.75	8.75	10.8	13	15.1	17.3	21.6
5	6	8	10	12	14	16	20
11.8	14.2	17.9	21.8	26	29.9	34.5	42.8
9.8	12.2	15.8	19.6	23.8	27.6	31.9	39.9
8.79	11.05	14.38	16.64	20.03	23.36	26.75	32.95
7.1	9.1	11.1	13.5	16.1	18.2	20.3	24.8
4.7	5.7	7.6	9.6	11.6	13.3	15.3	18.9
2.2	3.1	4.5	5.5	6.7	7.8	9	11.1
8	10	13	15	18	21	24	30
7.78	9.78	12.73	14.73	17.73	20.67	23.67	29.16
0.3	0.36	0.48	0.6	0.72	0.88	0.96	1.2

替代列表

ISO 7043 - 1983 ISO 7043 - 1997 ISO 7043 - 2012

等效标准

国标 GB	国际 ISO	德标 DIN	欧标 EN
GB /T 6183.1	ISO 7043	DIN EN 1663	EN 1663

以上有部分标准可能为近似等效，如有异议以标准原件为准

工艺相关

ISO 225

紧固件螺栓、螺钉、螺柱和螺母尺寸代号和标注

紧固件公差 Part1:螺栓、螺钉、螺柱和螺母产品等级 A、B和 C级

技术条件和引用标准

类型
标准
材料	螺母体
	嵌件
螺纹	公差
	标准
机械性能	等级
	标准
公差	产品等级
	标准
表面处理
验收及包装

NF (normal friction) and LF (low friction)

ISO 2320

钢 (ISO 898/2, ISO 2320)

For example, polyamid, (ISO 2320)

ISO 261、ISO 965

8、9、10

ISO 898/2, ISO 2320

ISO 4759/1

As processed
Requirements for electroplated coatings are covered in ISO 4042.
If different electroplating requirements are desired or if requirements are needed for other finishes, they should be negotiated between customer and supplier.

ISO 3269

引用参考

GB /T 1172

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 3103.1 - 2002

紧固件公差（螺栓、螺柱、螺钉和螺母）

GB 3103.2 - 1982

紧固件公差 - 用于精密机械的螺栓、螺钉和螺母

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

上海宜轩汽车标准件有限公司

联系人：马经理移动电话： 13918163118 电话：0512-63635531/63635532 Email:

登陆后可见

材料：碳钢、不锈钢；等级：6、8、10级；公称直径;M2.5~M56；表面处理：镀蓝白锌

[询价]

淮安德隆五金有限公司

联系人：杨经理

738688225 移动电话： 15800901551 电话：0517-89080122 Email:

登陆后可见

材质：碳钢，合金钢；等级：8级，10级；表面：镀锌，彩锌；规格：M4-M20

[询价]

类似标准及供货信息

1	[国标] GB /T 6183.1 - 2016	2型非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts With Flange（With Non-Metallic Insert）,style 2 供应商(16)
2	[国标] GB /T 6183.2 - 2016	2型非金属嵌件六角法兰面锁紧螺母细牙 Prevailing Torque Type Hexagon Nuts With Flange（With Non-Metallic Insert）,Style 2-Fine Pitch Thread 供应商(4)
3	[国标] GB /T 6183.1 - 2000	非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) 供应商(16)
4	[国标] GB /T 6183.2 - 2000	非金属嵌件六角法兰面锁紧螺母细牙 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) with Fine Pitch Thread 供应商(4)
5	[国标] GB 6183 - 1986	非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts With Flange (with non-metallic insert) 供应商(16)
6	[德标] DIN 6926 - 1983	非金属嵌件锁紧六角法兰螺母 Prevailing Torque Type Hexagon Nuts With Flange And With Non-Metallic Insert 供应商(12)
7	[国际] ISO 12125 - 2012	2型非金属嵌件六角法兰面锁紧螺母细牙产品等级：A型和B型 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) with Metric Fine Pitch Thread, style 2 - Product Grades A and B 供应商(1)
8	[国际] ISO 7043 - 2012	2型非金属嵌件六角法兰面锁紧螺母产品等级：A级和B级 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert), Style 2 - Product Grades A and B 供应商(2)
9	[国际] ISO 12125 - 1997	细牙六角尼龙法兰锁紧螺母 A级、B级 Prevailing Torque Type Hexagon Nuts With Flange(With Non-metallic Insert) With Metricfine Pitch Thread - Product Grades A and B 供应商(1)
10	[国际] ISO 7043 - 1997	非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts with Flange (with Non-metallic Insert) - Product Grades A and B 供应商(2)
11	[日标] JIS B 1199-3 - 2001	非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts With Flange(With Non-Metallic Insert) 供应商(1)
12	[汽标代号] Q 338	非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon flange nuts(with non-metallic insert) 供应商(2)
13	[汽标代号] Q 339	非金属嵌件六角法兰面锁紧螺母细牙 Prevailing torque type hexagon nuts with flange（with non-metallic insert）,Fine pitch thread 供应商(1)
14	[欧标] EN 1663 - 1997	非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert) 供应商(1)
15	[欧标] EN 1666 - 1997	非金属嵌件六角法兰面锁紧螺母细牙 Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallicinsert) with Metric Fine Pitch Thread
16	[法国] NF E 25-507 - 1998 (R2004)	非金属嵌件六角法兰面锁紧螺母细牙 Prevailing Torque Type Hexagon Flange Nuts With Non-Metallic Insert 供应商(1)
17	[法国] NF E 25-413 - 1998 (R2004)	有效力矩型非金属嵌件六角法兰面锁紧螺母 Prevailing Torque Type Hexagon Nuts With Flange (With Non-Metallic Insert)
18	[法国] NF E 25-506 - 1998 (R2004)	非金属嵌件六角法兰面锁紧螺母细牙 Prevailing Torque Type Hexagon Flange Nuts (With Non-Metallic Insert), Fine Pitch Thread
19	[德标] DIN EN 1663 - 1998	非金属嵌件锁紧六角法兰螺母 Prevailing Torque Type Hexagon Nuts With Flange And With Non-Metallic Insert 供应商(12)
20	[德标] DIN EN 1666 - 1998	非金属嵌件六角法兰面锁紧螺母细牙米制 Prevailing Torque Type Hexagon Nuts With Flange (with Non-Metallicinsert) With Metric Fine Pitch Thread 供应商(12)
21	[美标] ASME B 18.16.6 - 2017	六角法兰尼龙嵌入防松螺母 [Table 9] Nylon Insert Hex Flange Nuts 供应商(4)
22	[美标] ASME B 18.16M (flange/non-metal) - 2004	米制非金属嵌件法兰面锁紧螺母 [Table 2] (F563M, F836M, F467M) Metric Non-metallic Prevailing-Torque Hex Flange Nuts [Table 2] (F563M, F836M, F467M)
23	[美标] ASME B 18.16M (flange/non-metal) - 2004 (R2016)	米制非金属嵌件法兰面锁紧螺母 [Table 2] (F563M, F836M, F467M) Metric Non-metallic Prevailing-Torque Hex Flange Nuts [Table 2] (F563M, F836M, F467M)
24	[美标] ASME B 18.16.3M (flange/non-metal) - 1998	米制非金属嵌件法兰面锁紧螺母 [Table 2] Metric Non-metallic Prevailing-Torque Hex Flange Nuts [Table 2]
25	[航空] HB 5960 - 1986	尼龙锁紧六角凸缘螺母