会员中心 | English | 繁體中文

六角头自攻螺钉 ISO 1479 - 1983

选择规格尺寸点击↓

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

尺寸单位: mm

国际ISO 1479 - 1983 ISO1479 1479ISO 六角头自攻螺钉

模型下载替

扫一扫分享

单重计算公差

螺纹规格
d

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

P	螺距
a	最大值
s	最大值
	最小值
e	最小值
k	最大值
	最小值
y	参考	C型
		F型

0.8	1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
0.8	1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
3.2	5	5.5	7	8	8	10	13	16
3.02	4.82	5.32	6.78	7.78	7.78	9.78	12.73	15.73
3.38	5.4	5.96	7.59	8.71	8.71	10.95	14.26	17.62
1.6	2.3	2.6	3	3.8	4.1	4.7	6	7.5
1.3	2	2.3	2.6	3.3	3.6	4.1	5.2	6.5
2	2.6	3.2	3.7	4.3	5	6	7.5	8
1.6	2.1	2.5	2.8	3.2	3.6	3.6	4.2	4.2

替代列表

ISO 1479 - 1983 ISO 1479 - 2011

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 5285	ISO 1479	DIN EN ISO 1479

以上有部分标准可能为近似等效，如有异议以标准原件为准

工艺相关

ISO 225

紧固件螺栓、螺钉、螺柱和螺母尺寸代号和标注

紧固件公差 Part1:螺栓、螺钉、螺柱和螺母产品等级 A、B和 C级

技术条件和引用标准

材料
螺纹
机械性能
公差	产品等级
	标准
表面处理
验收及包装

钢（ISO 2702）

ISO 1478

ISO 2702

ISO 4759/1

Plain
电镀 ISO 4042
其他表面处理由供需双方协议

ISO 3269

引用参考

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 5280 - 2002

自攻螺钉用螺纹

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 5285 - 2017	六角头自攻螺钉 Hexagon Head Tapping Screws 供应商(1)
2	[国标] GB 5285 - 1985	六角头自攻螺钉 Hexagon Head Tapping Screws 供应商(1)
3	[美标] IFI 502 - 1982	米制六角头自攻钉 Metric Hex Head Tapping Screws
4	[德标] DIN 7976 - 1990	外六角自攻钉 Hexagon head tapping screws 供应商(4)
5	[国际] ISO 1479 - 2011	六角头自攻螺钉 Hexagon Head Tapping Screws
6	[日标] JIS B 1123 (JA3) - 2015	六角头自攻钉【JA3】 Hexagon Head Tapping Screws [JA3]
7	[日标] JIS B 1123 - 2015	六角头自攻螺钉（C型,F型和R型） Hexagon head tapping screws (Type C ,F and R)
8	[日标] JIS B 1123 (AT1) - 1996	六角头自攻螺钉（C型和F型） Hexagon head tapping screws (Type C and type F)
9	[日标] JIS B 1123 (AAT1) - 1996	六角头自攻钉【副表1】 Hexagon Head Tapping Screws [Annex Attached Table 1]
10	[美标] ASME/ANSI B 18.6.3 - 2010	六角头自攻钉 Machine Screw and Tapping Screw Nuts (Inch Seires)
11	[意大利] UNI 6949 - 1980	六角头自攻螺钉 Hexagon head tapping screws
12	[法国] NF E 25-662 - 1994	六角头自攻螺钉 Hexagon Head Tapping Screws
13	[英标] BS 4174 - 1972	六角头自攻钉 [Table 21] Hexagon Head Self-Tapping Screws [Table 21]
14	[澳标] AS /NZS 4402 - 1996	米制六角头自攻螺钉 ISO metric hexagon head tapping screws
15	[台湾] CNS 4308 - 2000	六角头自攻螺钉 Hexagon Head Tapping Screws
16	[企标] YJT 1020 (FBS)	梅花槽混凝土自攻型锚栓(盘头/沉头/六角法兰头)
17	[企标] YJT 4063 (WN1446C)	六角头自攻螺钉 Hexagon Head Tapping Screws
18	[德标] DIN EN ISO 1479 - 2011	外六角自攻钉 Hexagon Head Tapping Screws 供应商(4)
19	[美标] ASME B 18.6.3 (H9A+T1A) - 2024	无槽或开槽六角头以及大六角头 AB ABR自攻螺钉 Plain (Unslotted) and Slotted Regular and Large Hex Head Tapping Screws - Type AB and ABR
20	[美标] ASME B 18.6.3 (H9B-I+T1A) - 2024	十字槽凹穴六角头以及大六角头 AB ABR自攻螺钉 Cross Recess Indented Regular and Large Hex Head Tapping Screws - Type AB and ABR
21	[美标] ASME B 18.6.3 (H9B-VI+T1A) - 2024	梅花槽六角头自攻螺钉- AB ABR自攻螺钉 Hexalobular Socket Hex Head with Type AB and ABR Thread-Forming Tapping Screws
22	[美标] ASME B 18.6.3 (H9C-I+T1A) - 2024	十字槽六角头以及大六角头 AB ABR自攻螺钉 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Tapping Screws - Type AB and ABR
23	[美标] ASME B 18.6.3 (H9B-VI+T1B) - 2024	梅花槽六角头自攻螺钉-B牙,BP牙 Hexalobular Socket Hex Head with Type B and Type BP Thread-Forming Tapping Screws
24	[美标] ASME B 18.6.3 (H9B-VI+T1D) - 2024	梅花槽六角头自攻螺钉-A牙 Hexalobular Socket Hex Head with Type A Thread-Forming Tapping Screws
25	[美标] ASME B 18.6.3 (H9B[L]-VI+T1B) - 2024	梅花槽大六角头自攻螺钉-B牙,BP牙 Hexalobular Socket Large Hex Head with Type B and Type BP Thread-Forming Tapping Screws
26	[美标] ASME B 18.6.3 (H9B[L]-VI+T1D) - 2024	梅花槽大六角头自攻螺钉-A牙 Hexalobular Socket Large Hex Head with Type A Thread-Forming Tapping Screws
27	[美标] ASME B 18.6.3 (T30-VI+T40) - 2013	梅花槽六角头自攻螺钉- AB ABR自攻螺钉 Hexalobular Socket Hex Head with Type AB and ABR Thread-Forming Tapping Screws [Table 30&40]
28	[美标] ASME B 18.6.3 (Hex-VI-B/BP) - 2013	梅花槽六角头自攻螺钉-B牙,BP牙【表30&41】 Hexalobular Socket Hex Head with Type B and Type BP Thread-Forming Tapping Screws [Table 30&41]
29	[美标] ASME B 18.6.3 (Hex-VI-A) - 2013	梅花槽六角头自攻螺钉-A牙【表30&42】 Hexalobular Socket Hex Head with Type A Thread-Forming Tapping Screws [Table 30&42]
30	[美标] ASME B 18.6.3 (Hex[L]-VI-B/BP) - 2013	梅花槽大六角头自攻螺钉-B牙,BP牙【表30&41】 Hexalobular Socket Large Hex Head with Type B and Type BP Thread-Forming Tapping Screws [Table 30&41]
31	[美标] ASME B 18.6.3 (Hex[L]-VI-A) - 2013	梅花槽大六角头自攻螺钉-A牙【表30&42】 Hexalobular Socket Large Hex Head with Type A Thread-Forming Tapping Screws [Table 30&42]
32	[美标] ASME B 18.6.3 (T29+T40) - 2013	无槽或开槽六角头以及大六角头 AB ABR自攻螺钉 Plain (Unslotted) and Slotted Regular and Large Hex Head Tapping Screws - Type AB and ABR
33	[美标] ASME B 18.6.3 (T30-I+T40) - 2013	十字槽凹穴六角头以及大六角头 AB ABR自攻螺钉 Cross Recess Indented Regular and Large Hex Head Tapping Screws - Type AB and ABR
34	[美标] ASME B 18.6.3 (T31-I+T40) - 2013	十字槽六角头以及大六角头 AB ABR自攻螺钉 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Tapping Screws - Type AB and ABR
35	[美标] ASME B 18.6.5M (T20) - 2000 (R2010)	米制六角头自攻钉 [Table 20] Metric hexagon head tapping screws [Table 20]
36	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头自攻螺钉 B,BP型 [Table 39] Regular And Large Hex Head Tapping Screws - Type B and BP Thread Forming [Table 39]
37	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头自攻螺钉 C型(统一螺纹) [Table 39] Regular And Large Hex Head Tapping Screws - Type C Thread Forming [Table 39]
38	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头自攻螺钉 AB型 [Table 39] Regular And Large Hex Head Tapping Screws - Type AB Thread Forming [Table 39]
39	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头自攻螺钉 A型 [Table 39] Regular And Large Hex Head Tapping Screws - Type A Thread Forming [Table 39]
40	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头凸缘自攻螺钉 B,BP型 [Table 39] Hex Washer Head Tapping Screws - Type B and BP Thread Forming [Table 40]
41	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头凸缘自攻螺钉 C型(统一螺纹) [Table 40] Hex Washer Head Tapping Screws - Type C Thread Forming [Table 40]
42	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头凸缘自攻螺钉 AB型 [Table 40] Hex Washer Head Tapping Screws - Type AB Thread Forming [Table 40]
43	[美标] ASME B 18.6.4 - 1998 (R2005)	六角头凸缘自攻螺钉 A型 [Table 40] Hex Washer Head Tapping Screws - Type A Thread Forming [Table 40]